Detailed Product Description
fin press
Machine Constitution:
1. Uncoiler: It is easy and convenient to load and clamp material. It will send out
signal and machine stop working when no material.
2. Oil filter: oil lubrication, the unwanted fins oil is scraped by rolling movement
of two columns.
3. Die-exchanger: Dies can be installed and took apart in the space between suction
and oil filter (with die-exchange dolly),
4. Mainframe device: It is main part of fins line. consisted of bottom base,square
pillar, top beam,sliding block,lflywheel,clutch and so on.
5. Feeding converter: Each step distance for feeding can be adjusted and switched
to 12 proportion.
6. Suction: suction is used to suck and unloosen fins, adsorability can be adjusted
because air regulation is available. Material is unloaded by counter-blowing
mode, and the wind-sucking shelf can be adjusted toward feeding orientation.
7. Collector: pile up the finished fins (have shaped after stamping) to buttress.
Two units can carry out material-collecting and material-fetching at one time;
and it has two forms of rotation and translation.
