Pusher reduction furnace
Pusher reduction furnace is mainly used in the metal powder reduction And it is reliable and economical
| Pusher reduction furnace Usage | ||||
| Pusher reduction furnace is mainly uses in the metal powder reduction, its function is metal oxide compounds and so on tungsten oxide molybdenum oxide cobalt blue through certain temperature, the time, the furnace atmosphere control, take the hydrogen as the reducible gas, metal powder and so on its reduction tungsten powder molybdenum powder cobalt powder.Has the output big, the chamber temperature even, the system powder granularity even, the economical hydrogen and the electricity consumes the low status merit, is one use quite widespread continuous type work furnace. | ||||
| Feature | ||||
| Reliable Components use imported and domestic famous brand.Economical Water consumption, electricity consumption, gas consumption is lower than other same type products.Application Charge and discharge equipment is equipped with the double furnace gate structure, forms the replacement room, passes over the continual nitrogen replacement air.Enters when the boat ceases outside the furnace the air to enter in effectively the stove, is suitable especially for the high temperature, easily to oxidize the work piece heat treatment.Is lower than other type industry stove to the atmosphere request. | ||||
| Structure | ||||
| The complete equipment by the furnace body, the material boat push installment and warm major part controls the system three to be composed.The furnace shell and the bung mainly become by the steel plate knee bend formation and the section welding, semblance fine artistic.The furnace lining uses the ultra energy conservation structure: On the bung the heat insulating layer uses the entire textile fiber acupuncture blanket module, (is named suspended ceiling type structure) with the special-purpose method anchor on the bung steel plate.This kind of structure has the heat insulation effect to be good, gathers can lower, the heat los is small, the heat shock is good, overhaul convenience and so on many merits.Enhances the furnace lining service life greatly.Electric stove spatial stove parameters and so on dissipated power, fire walls temperature rise, furnace temperature uniformity surpass the national standards.The heating temperature control unit table uses Japan (SHIMA) Corporation intelligence temperature control unit.This instrument arrangement from the adjustment and the standard PID operation module could effective prevent the temperature has flushed, simultaneously this measuring appliance might carry on the function choice, the disposition and the parameter hypothesis, and by digital demonstration setting value and actual value.The host heating uses the SCR series combined type three-phase thyristor power controller, uses continuously the non-make-and-break type, it when control is not the traditional electrical make-and-break type, but is according to warm controls the request continuously automatic control thermal rating.Is high to the high efficiency temperature control precision, does not have the noise, does not have the disturbance to internal electrical network. |
| Technical parameter | ||||
| Model | TH-RF200-1 | TH-RF200-2 | TH-RF300-1 | TH-RF300-2 |
| Tube number | 1 | 2 | 3 | 2 |
| Heat hearth zone sizewidth×height×length mm | 220×80×3600 | 220×80×3600 | 300×100×5200 | 300×100×5200 |
| Heat zone number | 3 | 3 | 4 | 4 |
| Out putkg/h | 30-60 | 60-120 | 80-120 | 130-200 |
| Rated temperature | 1100 | |||
| Top temperature | 1150 | |||
| Rated heat powerkw | 50 | 90 | 80 | 120 |
| Rated electric voltageV | 380 | |||
| Pushing method | Electric or Hydraulic | |||
| Hearth material | Heat resistance stainless steel SUS321SUS310/High temperature ceramic tube | |||
| Heat element material | High temperature resistance wire/SiC rod or gas heating | |||
| Heat zone hearth size widthx height×length mm | 1390×1600×8000 | 1650×1600×8000 | 1490×1600×11500 | 1850×1600×11500 |
| Can produce non-standard industry furnace accoding to customer design | ||||
Pusher reduction furnace
