The machine is specially designed for embossed aluminum foil which the thickness is less than 0.1mm.
1. Paremeters
The machine is specially designed for embossed aluminum foil which the thickness is less
than 0.1mm, the other material the rigidness exceed the Aluminum foil are prohibited.
1. Thickness of Aluminum foil ≤0.1mm
2. The maximun width of foil 1250mm
3. The maximum outer diameter of foil roll 1000mm
4. Emossing speed 0~30m/min,(Rating speed:26-30m/min)
5. The maximum length aluminum foil winding 1200m
6. Installed capacity 9Kw
7. Equipment size 3600×2500×1600
8. Total weight ~3500Kg
9. Winding quality requirement: equal length on both side, no wave shape, no tower
shape,no perforation, lateral channeling layer tolerance is less than ±1.0mm
10. Normal service life 30,000,000 meters
2. Design parameters
2.1 Unwinding type
1. Structure of main machine: column structure.
2. Unwinding type: scaffolding 6" air shaft unwinding
3. Unwinding correction: adjusting manually
4. Unwinding load-bearing: ≤2.5T
5. Unwinding tension: adjusting the rension manually and freely
2.2 Embossing structure type
1. Embossing type: Vertical two facing rollers embossing
2. Roller specification: Φ290*1320
3. Roller materials: carbon steel
4. Roller hardness: ≥HRC50
5. Roller surface treatment: Hard chrome plating A10
6. Inner roller treatment: anneal, concoct, process
7. Frame structure: steel structure
8. Roller pattern: customer made
9. Transmission type: Electromagnetic regulating transmission(4kw)
10. Pressure type: manual screw pressing
11. Thickness adjusting: manual screw calibration limit control
2.3 Winding structure type
1. Frame: Steel frame structure
2. Winding type: Scaffolding 6" air shaft unwinding
3. Winding power: 4kw inverter control
4. Winding tension: Frequency vonversion constant tension control
5. Winding correction : Pneumatic correction
2.4 Others
1.Electrical control: Unwinding-electromagetism particle control, Embossing -electronmagnetism speed control, winding—frequency control
2. Integrate base
3. Colling water system
4. Fastness type: grounding expansion screw
2.5 Equipment list and accessories list
No. | Item | Q'ty |
1 | Base and frame | 1set |
2 | Magnetic particle tensioner | 1set |
3 | Air shaft bearing | 2sets |
4 | Embossing roller | 1set |
5 | Guide roller | 4sets |
6 | Motor and speed-reducer | 1set |
7 | Pneumatic and hydraulic corrective device | 1set |
8 | Elecrical control system | 1set |
Accessories | ||
9 | Special wrench | 2pcs |
10 | Allen key | 1 sets |
11 | Ajustalbe wrench | 1pc |
12 | Inflatable tube | 15 meters |
13 | Button | 2pcs |
14 | Manual and circuit diagram | 1 share |
Aluminum foil embossing Machine