1. including Type3 Software. 2.Delta inverter 3. vacuum table 4.CE and ISO9001
Jinan lower water-jet cutting machine 1325
Technical characteristics description
CNC water-jet cutting machine is composed with cutting table, High pressure pump, CNC control system with cutting software, cutting head, water valve, and sand controlling system. Also you can choose optional systems such as auto abrasive feeding system, water softening system and oil cooling system according your requests.
1 Cutting table |
1.1FLDW-1325 structure feature
1.1.1 structure feature
-- Casting beam and Y-axis base frame make it have excellent precision and stability.
-- Table body and water tank which are sub aspect structure, lessen the pressure of sands and machined parts to moving parts.
-- X-axis and Y-axis transmit to rolling nut ball screw mandrel.
1.1.2 Controlling system
We adopt the famous NAIKY controlling system and MITSUBISHI AC servo digit driving system and AC servo motor.
-- 17”LCD liquid crystal display
-- DNC on-line working function
--Functions of returning arbitrary point, bending, and circular arc working auto deceleration.-- Function of cutting figure imitation display.
-- 80GB memory hard disk
-- MITSUBISHI AC servo driver and motor.
--1GB memory card
-- Multilingual function(Chinese English ,etc.,)
--Drive-by-wire and hand-hold controller,(according to requests)
1.1.3Chief technical parameter
- structure:Bridge
- size(X×Y):1300mm´2500mm
- X-axis:2500mm
- Y-axis:1300mm
- Z-axis:150mm
- repeatability:0.025mm
- Max pressure:380MPa
- X,Y speed:0-15m/min
- cutting accuracy:±0.1mm
power:380VAC, 50Hz , 3 phase 4 wire system (can be customized)
1.1.4Transmission system
- We adopt HIWIN (Taiwan) lead rail and gear rack to ensure accuracy
durable and quality.
1.1.5Prevention system
- Over travel auto spacing function and soft spacing function
1.1.6Lubrication system
- We adopt auto mass lubrication system to make oil reach every oil site on time and also make table steadier and easier.
2 Abrasive cutting system |
Abrasive cutting system is composed with integrative cutting head, water switch,
abrasive meter, sand valve and sand feeding bin.
2.1 Integrative abrasive cutting head
The cutting efficiency of integrative abrasive cutting head is one of highest machine in the world.
- It has rectification function and lessens the time of assembling.
- Changing the wearing parts is simple.
2.2 Water switch
- Air valve can open and close the water instantaneously.
- With the help of CNC we can control water automatically.
- Blockage pressure can be adjusted arbitrarily to realize the operation under the low pressure circumstances.
2.3 Sand feeding system
- Dynamic sand feeding
- Manual makes up the sand for the feeder (assisted with sand meter, auto feeder can realize automatically feeding)
2.4 Sand valve
- Dynamic sand feeding
- Dynamic type comes over traditional type.
- Manual type makes the operation easier.
- With the help of CNC we can control abrasive automatically.
2.5Sand hopper
- Side-hanging sand hopper
- There is a window on the side face. It can remind workers when to feed sand
- It can provide the sand consumption every time after it is filled up.
3 High pressure system |
3.1 (configuration) 380MPa high pressure systems
3.1.1 Generator
- the configurations single pole two-way plunger type intensifier
some parts of intensifier are imprted from USA,such as check valve body ,high pressure cylinder ,check valve repair kit ,on/off valve repair kit, seals etc.
(AccuStream)
- USA pipeline
- Single-row type water filtering system (5Micron, 1micron, 0.45micronparallel)
- Manual pressure regulation function
- Extra pressure auto stop and protection
- Three-ply safeguards
3.1.2 Tools
- Special tools (list1)
3.1.3 Random fittings
- Additional wearing parts (list2)
3.1.4 hand-book
3.1.5 Chief technical parameter
- Max pressure:380MPa
- Max flow rate: 3.7l/min
- Power: 30KW/40HP
- Power:380VAC, 50Hz ,3 phase
4 PCIMC-6A special software(NAIKY) |
NAIKY PCIMC-6A special software .
The functions of PCIMC-6A are as follows:
- Change DXF document which is educed from AUTOCAD into numerical control process.
- Serial communications between PC and CNC.
- Open database can shore parameter, just click the material, parameter will be loaded automatically
- Calculate length of line and time automatically
- Control cut-out and cut-in automatically
- cutting track auto imitation function
- The functions of lessening speed on the corner remanding material bridging and lancing
5 Auto abrasive feeding system(option item) |
It provides the functions of shoring and sanding sands for the machine, also improves the automation and lessens intensity of labor.
- Capacity: 100-170L
- High accuracy can remain workers when to feed sands.
6 Auto water cooling system(option item) |
- Guarantee that hydraulic system can be used circularly.
Save water
china lower water-jet cutting machine 1325
