Three-shaft Thread Rolling Machine ZC28-6.3 with maximum rolling pressure 63KN
*Three-shaft Thread Rolling Machine *maximum rolling pressure 63KN *diameter of main shaft 45mm
| Three-shaft Thread Rolling Machine | |
| Model | ZC28-6.3 |
| This is a thread producing machine which uses its three thread rolling dies, mounted in the same separation | |
| angle of 120°,to realize roll forming of the work piece, for metal has the performance of plastic | |
| deformation under the pressure operation. | |
| It is not only used for roll forming of normal thread work piece, but also applied to thin-walled thread | |
| work and special-shaped work. | |
| Generally speaking, material for roll forming should be carbon steel, alloy steel or some non-ferrous metal, | |
| with elongation>10%,tensile strength<1000MPa,and hardness | |
| maximum rolling pressure | 63KN |
| diameter of main shaft | 45mm |
| maximum width of rolling die | 60mm |
| minimum center distance | 43mm |
| feeding speed | 0.1~4mm/s |
| speed of mineshaft | 44\66\92\137r/min |
| gross power | 8kw |
| maximum inclination of main shaft | ±6° |
| maximum diameter of rolling die | 155mm |
| maximum center distance | 95mm |
| Max. rolling dia. | 120mm |
| maximum diameter range | 14-42mm |
| maximum thread pitch | 3mm |
| net weight approximate | 7000kg |
| overall size | 2100 x 2200 x 2300mm |
Three-shaft Thread Rolling Machine ZC28-6.3 with maximum rolling pressure 63KN
