1,Beam transmission system: USA II-VI 2,Spanish FAGOR 8070 controller 3,O2, N2 and air auto-exchange system
Technical Parameters:
Stroke | |
X-axle | 4000mm/6000mm/8000mm |
Y-axle | 2000mm |
Z-axle | 100mm |
Speed | |
X-axle | 100m/minute |
Y-axle | 100m/minute |
Z-axle | 50m/minute |
Precision | |
X-axle positioning precision | ±0.03mm/m |
Repositioning precision | ±0.02mm |
Y-axle positioning precision | ±0.03mm/m |
Repositioning precision | ±0.01mm |
Acceleration | X,Y axle 1.5g |
Power of the CO2 laser | 1500W~6000W |
Power of fiber laser | 500W~4000W |
MAIN FEATURES:
1, Adopt the most advanced third generation of hanging gantry flying optics structure. The gantry moves with the centralized drive. The precision is high.
2, The difference error caused by double drive has been completely solved. The precision is stable.
3, The transmission parts adopts précised rack and pinion. The speed is fast.
4, Adopts the high performance aluminum magnesium alloy hanging cross beam. The weight is light, so the speed acceleration is high.
5, Adopt U axle beam compensation technology to make sure the beam diameter stable in area.
6, Adopt centralized lubricating device controlled by control system to automatically lubricate the transmission parts so that the living lives and the precision of the transmission parts are protected.
Double focusing cutting head make it easier to replace mirrors. It helps you save time for replacing mirrors.
Equipped with section duster to improve the working environment
The hanging gantry beam structure use central drive which avoided the problem of synchronization error of double drives. The operator can get close to the machine and load or unload from X axis directions
German ROFIN DC025 laser: This laser CO2 slablaser. It has the following features; good beam mode makes cutting good quality and high efficiency. The gas consumption is only 0.2L/hour. A bottle of special gas can run 7200 hours. No turbine in the laser which makes the machine stable.
cnc laser cutting machine metal
