1:Both for slitting and cutting 2:High speed 3:Mitsubishi PLC 4:Less space
This machine is the accessorial equipment for roll forming machine or folding machine, which is used to slit coil sheet to be two strips or more than , and transfer it to support it. In order to get some nonstandard width length sheets. It has many advantages such as low noisy, stable running, simple operation and nice appearance etc.
Suitable coil width: | 1000-1250mm |
Material strength | 230-300Mpa |
Capacity of decoiler (Selection 5T or 8T) | 5T (Hydraulic decoiler, sharing the hydraulic station with cutting system. Hydraulic expanding and hydraulic motor releasing the coil, with light control) |
8T (Separate hydraulic station, hydraulic expanding, electric motor actively release the coil, with ultrasonic to control the speed) | |
The parameter of sheet coil | Inner diameter φ508 or 610 Outer diameter 1350 mm |
Thickness of material | 0.3~0.7mm |
Number of Slitting Knives | 12 sets |
Slitting strip width | The strips should be Min 60mm (adjustable.) |
Length tolerance | +/_ 1.5mm in 3M in length |
Slitting speed | 10M/min |
Motor power (Selection 5T or 8T) | slitter power 2.2KW 5T: Tower Power of the line: about 5KW) (up to the final design) 8T:Total Power of the line: about 11KW (up to the final design) |
Cutting | cutting to length automatically. |
Power source | 380V/3phase/50Hz |
Detailed Photos:
Filming Device:
Feeding Device For Cutting:
Cutting to Length:
Guiding Device after Cutting:
Slitter(for Slitting to strips):
Operation Desk:
Cutting and Slitting Machine
