Welcome to ECBAY
IW-40 (Q35Y-12)Single Cylinder Hydraulic Ironworker
IW-40 (Q35Y-12)Single Cylinder Hydraulic Ironworker

A hydraulic Ironworker can be used for punching, shearing, notching, bending and other metal fabricating functions.

Ironwoker/ punching and shearing machine

Features:

EMM’s universal multi – function Ironworker machine for production purposes with maximum efficiency and minimum deformation. The Q35Y-12 (40 ton) pressure machines are in the EMM’s tradition of well engineered, robust steelworkers built for long working life.

The universal machines are supplied with standard tooling include repetition support table at punching, shearing and notching stations and with easily adjust hold down at five stations to safely and control the operations, comprehensive safety guards are fitted as standard on all working stations.

Free standing on suitable floor, the ironworker machines just require electrical connection to be ready for work. For two operator utilization, the hydraulic system is activated by two shielded for switch control , one operating the punching end cylinder, the other operating shearing end cylinder, the shear cylinder provides the power to three shearing stations and notching station.

The system gives precision accurate power inching at all give five works stations and allows the ironworker machine to be stop at any position giving safe and accurate tool setting and working positioning. Limit switches at both ends of the machine control stroke length at all stations.

Centralized lubrication is meter by one – Shot system, being only one feature of the low maintenance requirement.

Machine includes 1 movable magnetic base low volts halogen light, 1meter long touch and cut rule length stop back gauge. Fine adjustment facility to punch stroke and measuring scale in the notching table.

No.

                     Descriptions

                  

             Model

Unit

(mm)

1.Machine Technical Data

Single Hydraulic Steel Worker Machine

IW-40 (Q35Y-12)

Metric

Rated Capacity in pressure Force

400

KN

Metal Tensile Strength

≤450

N/mm2

Stroke Ram length

32

mm

Stroke Speed – 16 mm Travel

23

min

2.Punching Station

Deep Throat Standard

175

mm

Punching maximum capacity ,

Material x Diameter x Thickness

20x10

mm

Punching maximum capacity,

Material Diameter x Thickness

38x6

mm

Punching Largest hole (Optional)

57

mm

Working height

940

mm

3.Flat Plate Cutting Station

Flat Plate Shearing Maximum

Width x Thickness

200x 10

mm

Flat Plate Shearing Maximum

Width x Thickness

350x6

mm

Angle Flange Trim Maximum 45°

80x10

mm

Working height

940

mm

4.Angle Cutting Station

90° Miter (True Interior /Exterior )

80x8

mm

45°  Miter (True Interior /Exterior )

50x6

mm

Working Height

1140

mm

5.Section Cutting Station

Round Bars Maximum Diameter

30

mm

Square Bars Maximum Diameter

25

mm

Channel C or U /I or H Beams( Optional ) cust

76 x 38

mm

Tee ( Optional )

38 x 6

mm

Working height

1140

mm

Punching Maximum capacity

Diameter x Thickness

Not Available

mm

IW-40 (Q35Y-12)Single Cylinder Hydraulic Ironworker

Ads by Google


About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.