Welcome to ECBAY
Full Automatic And Much Economic Pulley Wire Drawing Machine
Full Automatic And Much Economic Pulley Wire Drawing Machine

1)Min. order: 1 set 2)Payment : T/T L/C 3)Package: normal export sea package met 4)deliverty time : 45-60 day

 OTO Wire Drawing Production Line/Pulley Type Wire Drawing Line

-------------------------------

1. Description: The pulley type continuous wire drawing machine has the characteristics of simple structure, low cost, and easy operation, and it is suitable for drawing a variety of medium and thin fiber material, especially for mild steel wire, galvanized iron wire, steel head wire, stainless steel wire, rubber hose steel wire, spring steel wire, rod welding wire and copper wire aluminum rod, etc. Scope of application: gas-protection welding wire, welding electrode, stainless steel wire, galvanized iron wire, bullet and hard wire, copper wire, and metal product wire, etc. 2. Usage:The set of the machine is ideal equipment drawing wire stock of high, medium and carbon steel, as well as copper, aluminum and alloy. The machines are applied to drawing wire in the factories such as wire-steel factory, metal mesh factory and nail making factory etc. 3. Structure:The equipment consists of main reduction box.die casing, wheel frame, sash brace and electrical control system. The spinning drawing blocks are driven by JZT series motor, with gear coupling runs changeful gears to reduce speed. The drawing blocks are vertically fixed in sealed box body. The gear pairs are lubricated with oil. In order to lower residual heat on the surface of the block, the cooling means is installed in interval of the block. To reduce its working temperature, the machine is soaked in cooling water. The machine runs with carvel or linkage. The safety halt gear is installed by the position of operating block.

Transmission System: Strong narrow joint V-belt; strong narrow joint V-belt and spiral bevel gear; strong narrow joint V-belt + standard gear box transmission.Mode of speed: adjustment AC frequency conversion controlPay-off Method: Pay-off machine or spool pay-off machineTake-up Method: I-Spool take-up machine or trunk pay off machine Material: Suitable for Drawing Welding rod; welding Wire (gas protection welding wire and submerged arc welding wire); steel wire (medium, low carbon steel wire, stainless steel wire); Wire and cable (copper wire, aluminum wire) and other metal wires* Various combined drawing equipment can be designed according to the customers' requirements

4. Main technical parameters:

Diameter of capstan

360-400

560

mm

Drawing dies

9

9

Time

Maximum diamter of inlet wire

2.5-3.0

6.5

mm

Minimum diameter of outlet wire

0.8

2.3

mm

Total compression rate

90

87.48

%

Average compression rate

22

20.61

%

Maximum linear speed

12

3.5

m/s

Unit motor power

7.5-11

18.5-30

kw

Unit dimension

9000×1650×2250

12000×1850×2250

mm

Unit weight

1.5

2

t

Inlet variable-frequency

Controlled by PLC

Controlled by PLC

---------------------------

About Our Wire Drawing Machine Factory

Full Automatic And Much Economic Pulley Wire Drawing Machine

Ads by Google


About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.