This series equipment is suitable for copper and copper alloy extruded pipe, rod, row, wire and other products.
Features:
1. The whole structure with four-poster horizontal, set on the tank. Has the structure of new, neat, easy to maintain.
2. Moving beam using four-point positioning, center adjustable, tool and die design and reasonable can greatly reduce the production costs.
3. Can set different extrusion process, using dynamic and fixed pin mode with extruded tubes with different pore sizes.
4. Using a large flow of hydraulic cartridge valve system, good sealing performance, low temperature rise.
5. Electrical Parts MITSUBISHI PLC products, sensitive and reliable.
Type | Working pressure of hydraulic system | Extrusion pressure | Height | Bore dimensions of extruding cylinder | Motor power | Overall dimensions |
XJ-300 | 21MPa | 3000KN | 700 mm | Φ55-Φ75×350 | 110 kw | 5.5×2.1×2.3 |
XJ-500 | 21MPa | 5000 KN | 895 mm | Φ75-Φ95×400 | 150 kw | 7×2.3×2.7 |
XJ-630 | 21MPa | 6300 KN | 945 mm | Φ85-Φ105×400 | 225 kw | 7.5×2.3×2.8 |
XJ-800 | 21MPa | 8000 KN | 1045 mm | Φ105-Φ135×550 | 396 kw | 10×2.3×3.1 (11×2.3×3.1) |
XJ-1000 | 21MPa | 10000 KN | 1095 mm | Φ125-Φ145×600 | 396 kw | 10.5×2.4×3.3 (11.5×2.4×3.3) |
XJ-1250 | 21MPa | 12500 KN | 1185 mm | Φ135-Φ165×650 | 528 kw | 12×2.5×3.4 (13×2.5×3.4) |
XJ-1630 | 21MPa | 16300 KN | 1285 mm | Φ155-Φ205×750 | 1000 kw | 13.5×4.3×4.1 (14.5×4.3×4.1) |
XJ-1800 | 21MPa | 18000 KN | 1285 mm | Φ175-Φ225×800 | 1000 kw | 14×4.3×4.1 (15×4.3×4.1) |
XJ-2000 | 21MPa | 20000 KN | 1650 mm | Φ195-Φ245×850 | 1075 kw | 15.5×4.5×4.3 (17×4.5×4.3) |
XJ-2500 | 21MPa | 25000 KN | 1700 mm | Φ225-Φ265×900 | 1250 kw | 18×4.8×4.5 (20×4.8×4.5) |
XJ-3000 | 21MPa | 30000 KN | 1860 mm | Φ255-Φ305×1000 | 1500 kw | 20×4.8×5 (22×4.8×5) |
copper extrusion press / extrusion line
