1. Diameter measuring device 2. accuracy: 0.002mm 3. Range: 0.2-45mm 4. Double directions 5. For cable, wire, pipe...
Model LDM50XY cable wire laser diameter measuring device, Diameter control for Extruders is the high-accuracy survey installment that uses the laser scan to carry on the no-contacts on-line survey. It (namely X axis and Y axis) simultaneously measure the diameter in two directions.Applicable to metal wires, pipes, wire and cable, etc. The diameter of the measurement and control. Bi-directional measurement, the average shows that can simultaneously show the wire, pipe diameter, roundness. Performance is stable.
1. Technical parameters
| Model | Measuring Range | Resolution | Accuracy |
| LDM25XY | 0.1-20mm | 0.001 | ±0.02%×(Reading)±0.001mm |
| LDM50XY | 0.2-45mm | 0.002 | ±0.02%×(Reading)±0.002mm |
2. The performance indicatorsMeasurement: Laser scanningLaser: Visible red semiconductor laserLaser output power: <2mWOperating voltage: ~ 220V ± 15% 50 - 60HzOperating temperature: -10 ~ 40 °CHumidity: <85% RHWork mode: continuousPower consumption: <30WDimensions: Measuring head: 372mm×360mm×60mm
3. Characteristicsi. Can be connected PLC, industrial computer.ii. RROFIBUS-DP can be allocated and MODBUS converter and PLC, IPC Connect.iii. Can be equipped remote controller DDC-3, DDC-5, on the extruder and automatic feedback control to control the tolerance, improve product quality, reducing consumption.
4. Display Controller (Model:DDC-3, DDC-5)
i. It be used to display and control.ii. Applicable to DC motors, VVVF motor.iii.The controller can control the speed of extruder or the tractor according to the diameter tolerance.Signal distance: More than 500mOutput voltage: ±10VWith RS485 It can connect to PLC industry controlling computer The PROFIBUS-DP or MODBUSCan be selected.External dimensions:164mm×85mm×280mm (Model:DDC-3) 100mm×100mm×120mm (Model:DDC-5)
Model LDM-50XY cable wire laser diameter measuring device, Diameter control for Extruders
