Welcome to ECBAY
Sluice opening and measurement system
Sluice opening and measurement system

Sensors (adopt all good quality imported products) Protection level IP 65 Resolution: 1mm Usage

This digital sluice gate Opening measurement device is designed, manufactured, assembled, packed, and delivered strictly in accordance with ISO9001 (Version 2000). It is also manufactured in accordance with HEOS/GD01 FDK series sluice gate Opening measurement device industrial standard and relevant national standard. It is examined and verified in accordance with the manufacture/acceptance test technical condition of HEOS/GD02 digital sluice Opening measurement device and opening display controller and regulator. This product is mainly used to measure, display and control the automatic measurement device of plate gate, radial gate and herringbone gate.

 Characteristics

Adopt high precision line-storing type measurement wheel, free of slipping phenomenon to make the measurement more accurate.

New type of sealing terminal box and water-proof cable connector allow more convenient wiring and more reliable sealing.

Particular protective wire-snapping institution protects the equipment automatically from the wire-snapping accident.

Particular single direction brake wheel make installation and repair more convenient.

Basic parameters

Measurement range: Standard range 0~16m(Practical measurement range is tailored according to the requirement of the user.

Single cycle travel: 409.6mm

Resolution: ±1mm

Full distance accuracy: ±3mm

Repetition accuracy: ±1mm

 Limit switch

Quantity: two passive commonly-open contact point

Repetition accuracy: ±5mm

Mechanical parameters

Pulling force: 5.5kg (maximal)

Measurement wire: F 1.5mm stainless steel wire

 Environment condition

 Work environment temperature: -20°C~+70°C

 Work environment humidity: ≤95%RH

 Protection grade: IP65

MTBF

MTBF:  30000 hours

Electric parameters for Opening measurement device

Output signal:  SSI serial signal

Output code: binary Gray code

Work voltage: 10~30VDC

 Linearity: ±1LSB

 Total resolution: 24 bit

Display basic parameters (optional)

Display: four digit or five digit LED display

Input interface: SSI serial interface

Parameter function setting via the keyboard

Output interface: 4~20mA, switching volume

Resolution: ±1mm

Protection grade: IP50

Work power supply: DC24V/0.7A

Work mode: continuous

Sluice opening and measurement system

Ads by Google


About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.