1.Low voltage rail flat car 2.Used For heavy load good 3.Use for factory,coal,metallurgy
Specifications:
electric flat car is a 36V power supply low voltage track electric flat car, its working
principle is based on supply rail trolley line. Step-down transformer control cabinet ground single-phase (three phase) AC 380V step-down to the individual (three phase) 36V safe voltage.The walking track (track trolley line feed)
fed to give flat car, and then by car for the single-phase step-up transformer step-up (three phase) AC 380V. A flat single-phase capacitor motor vehicle to provide power (when three-phase motor YZ lifting metallurgy).
Since it no use cable, so safe, not afraid of hot, not afraid to drop it, without prejudice to the
cross-transport, easy to implement remote control and automation, can be in the corners, even the fork i
n the roundabout long distance run, to plant rationalization of the transport arrangements to provide
favorable conditions. But the track in high demand must ensure rail insulation, more than a certain distance running track should be added copper wire compensation. Long distance running must also be increased number of step-down transformer.
Model | KPx-5-1 | KPX-5-2 | KPX-10-1 | KPX-10-2 | KPX-20-1 |
Carrying capacity(t) | 5 | 5 | 10 | 10 | 20 |
Moving speed (m/min) | 30 | 30 | 30 | 30 | 30 |
Truck distance(mm) | 1435 | 1435 | 762 | 1435 | 762 |
Wheel distance(mm) | 1700 | 1700 | 2000 | 2000 | 2200 |
Table size(mm) | 3200*2000 | 3200*1600 | 3600*200 | 3600*1600 | 4000*2200 |
Overall dismension(mm) | 3200*2000*550 | 3200*1600*650 | 3600*2000*650 | 3600*1600*650 | 4000*2200*650 |
Power supply | Three Phase Current 380V 50HZ | ||||
Motor type | JDYP-11-6 | JDYP-12-6 | |||
Brake model | YWZ4B-100/23 | YWZ4B-200/23 | |||
Minimum turning radius | 300 | 300 | 300 | 300 | 400 |
Wheel diameter(mm) | 30 | 30 | 30 | 30 | 35 |
Recommend stail rail | P24 | P24 | P24 P38 | P38 P43 | P38 P43 |
Referred weight(kg) | 2.067 | 1.915 | 2.492 | 2.285 | 3.575 |
KPX electric flat car
