1.This marine light electric windlass manufacture of good quality and low price. 2.Apply to a variety of ships.
This marine light electric windlass is based on a set of efficient motor reducer, without specialized mount set. On one side of the anchor gear is gypsy wheel, a clutch is near the gypsy wheel. When the ship weigh anchor, the clutch combine with gypsy wheel, drive the torsional force of gear box to gypsy wheel. When drop anchor, either can through control box to control the falling speed of the anchor, or can separate the clutch, allow the anchor to quick and free falling. On the other side of the anchor gear is warpingbarrel, it is connected with axis, it always running with motor. And it also equipped with a electrical control box,which to control itself.
The turn parts bearing of anchor gear use the copper of high quality. The has high transmission efficiency, low energy-consumption, very low operation noise. Main parts make with 304 stainless steel, polish by hand, refinement and beautiful in appearance, total weight only two-thirds of the same products. This equipment especially suitable for high-performance, high-speed yacht,business boat,speedboat and law boat.
Technical specifications A
a. Anchoring Part
Dia of Chain 12.5mm(AM2)
Working load: 6.6kN
Rated speed: 7/14m/min
Overload pull: 9.9kN
Holding load: 19.8kN
Quan of wheel: 1
b. Motor Part
Type of el-motor JZ2-31-H-4/8
Power 1.2/3kW
Rotating speed 700/1420r/min
Working duty S2
Voltage 380V, 50Hz, 3 Phase
marine electric windlass
