transformer evacuation/ transformer drying/ vacuum pump set vacuuming process in the production, installation and maintenance
Application:
ZKCC series vacuum pumping device is a new type of vacuuming equipment developed and produced by our company. It is widely used in the process of producing vacuum condition for various equipment. Its vacuum pressure can reach much lower than any other products in the same field.Application:
It is widely used in the vacuuming process in the production, installation and maintenance of many electric power equipments, like electric power transformer, capacitor etc., and is also used in the technical process of industrial production, such as vacuum drying, vacuum distillation, vacuum wielding, vacuum coating etc.It is not suitable for the vacuum process for air and gases containing too much powder, water and oxygen as well as explosive, corrosive, poisonous and chemical substances.Characteristics:
1. The machine adopts special Roots pump and vacuum pump, so the vacuum pumping speed and pressure, are obviously better than any other devices.
2. Working vacuum range and maximum vacuum degree are superior to other products.
3. It is installed with special vacuum gauge for accurate indication.
4. It adopts automatic vacuum relay for automatic control.
5. Stable and reliable operation, low noise, and easy to move.
Technical Parameter
Technical Parameter | ZKCC-30 | ZKCC-70 | ZKCC-150 | ZKCC-300 | ZKCC-600 | ZKCC-1200 |
Gas Pumping Speed (L/s) | 30 | 70 | 150 | 300 | 600 | 1200 |
Vacuum Limit (Mpa) | 5 | 5 | 3 | 3 | 2 | 2 |
Working Vacuum (Mpa) | 130 | 125 | 110 | 105 | 100 | 80 |
Total Electric Power (kw) | 1.65 | 2.6 | 5.2 | 9.5 | 10.7 | 20.5 |
Main Pump Type | ZL-30 | ZL-70 | ZL-150 | ZL-300 | ZL-600 | ZL-1200 |
Front Stage Pump Type | 2X-8 | 2X-15 | 2X-30 | 2X-70 | KT-300 | KT-500 |
Wire size of power supply input ≥(mm2) | 1 | 1.5 | 3 | 4 | 6 | 8 |
Power Supply | 50Hz 380V (3phase, 4wire) | |||||
Gas Inlet Caliber (mm) | DN50 | DN80 | DN100 | DN160 | DN200 | DN250 |
Gas Outlet Caliber (mm) | DN34 | DN60 | DN70 | DN90 | DN70 | DN90 |
Overall Dimensions (cm) | 73×46×100 | 79×55×120 | 105×60×135 | 132×78×150 | 145×86×201 | 168×100×269 |
(oil purifier, oil purification, oil filtration, oil recycling, oil treatment, oil regeneration, oil restoration, oil filtering, waste oil disposal, oil reclaiming, waste oil management, energy saving, oil reconditioned, oil reconstituted, oil restituting, oil recovering ,oil filtration, oil filter, petroleum machine, oil tester, oil analyzer, testing equipment)
Our oil filtration machine:
Series ZY Single-Stage Vacuum Transformer Oil Purifier
Series ZYD Double High Vacuum Transformer Oil Purifier
Series ZYB Multiply-Function insulating oil treatment machine
Series TY Turbine Oil Purification Apparatus
Series TYA Lubricating oil/ hydraulic oil purification unit
Series TYB Portable light Fuel oil purification machine
Series TYD Vacuum dehydrator
Series TYF Phosphate ester fire-resistance oil purifier
Series PL Plate pressure oil purifier
Series TYD Vacuum dehydrator
Series EFD Explosion protection filtration machine
Series BAM Press filtration system
Series ZKCC Vacuum pumping device
Series COP Cooking oil purification machine
Series CYS Centrifugal oil purification machine
Series JL Portable oil filtering and oiling machine
Our oil tester/ analyzer:
Series IIJ-II Dielectric oil breakdown strength tester
Series TP-3A Water content tester/ moisture sensor
Series TPV-8 Viscosity analyzer
Series TPC-2100 Flash point analyzer (close cup)
Series TPO-2100 Flash point analyzer (open cup)
Series CL-3 Interfacial tension analyzer
transformer evacuation/ transformer drying/ vacuum pump set
