DJCZ50-1050-II Tri-Filter Industry, hydraulic pressure purification and water treatment industries filter making.
1, Speed: 0.5M/Min~12M/Min (adjustable)
2, Adjustable width: 32~1100MM
3, Power Supply: 0.75KW+0.72KW+1.1KW + (4KW heating assembaled, if you need this heating function works), HZ: client pointed.
4, Weight: 350KGS + 400KGS + 650KGS
5, Dimensions: 1500*1300*1100 + 1550*750*1100 + 1670*1720*1240 (L*W*H,MM)
6, Compressed Air requested: 0.6MPa
7, Products width: 1050MM (Max.)
8, Heating temperature: 200 Deg.(Max.)
*** Features ( Pre-Slit, Mark/Press, Pleat)
1, Can make pleating block, but no emboss on sides. In case pleating block is not
requested, you can use change working edge of pressing mould. Especially suitable for making Heavy-Duty Air filters.
2, The pre-slitting machine can be accurately and freely adjusted to get requested dimensions, by adjusting freequency converter speed regulation and cylinder blades. After slitting the paper, the conveyor for feeding the filter paper runs in synchronism with marking machine by equipping the infrared monitoring system.
3, The marking machine can mark in different pleat sizes, the marking distance can be set freely by operating on the computer screen, and accurately marking distance achieved by stepping motor.
4, Pleating Knives go Up-Down
5, Pleating quantity can be set.
6, Pre-heating to solidify the pleated shape
7, This machine can also pleat steel wire mesh and non-woven laminated for making hydraulic filters
filter making machines