Portable flame cutting machine 1.cut any plane graphics 2.CE 3.low cost with good quality 4.FastCAM software
portable flame cutting machine
Introduction:
1.Unitary and high strength Aluminum alloy track, Special designed unitary track,make sure the main machine running steadily.
2.The parts of heat-resistant protective board on end of torch, prevent thermal-radiation and the damage for solenoid valve or other electric parts when cutting, enhance their lifetime.
3.Adapt to flame cutting and plasma cutting, the clamping part of torch adapt to most kinds of torches, cable bracket of plasma cutting gun is easy to use and maintenance.
4.The plasma and arc voltage height adjustmentTHC on top of main machine, both have initial positioning function and compatible to any kind of cutting machine, connect handily
5.Stable basis is guarantee for cutting quality.
Specification:
Type | HC-1530 |
Power source | 220±10%VAC 50/60Hz 220W |
Cutting mode | O2/C3H8 or C2H2, Plasma available |
Effective cutting range(mm) | 1500×3000 |
Track L × W × H (mm) | 3500×273×60 |
Track Holder Quantity | 2 |
Track Holder L × W × H (mm) | 500×80×40 |
Cutting speed(mm/min) | 50-2000 (Max 4000 available) |
Cutting thickness(Flame)(mm) | 5-150 (O2+C3H8 or C2H2) |
Cutting thickness(Plasma)(mm) | In term of customer's plasma power source |
Move precision | ±0.2mm/m |
Torch | Flame, electric height adjustment (±60mm) |
Host weight(kg) | 19 |
Gas pressure(Mpa) | Max0.1 |
Oxygen pressure(Mpa) | Max0.7 |
Type of gas | Propane, Ethine |
CE certification!!! Portable Flame Cutting Machine