LED Mining Light Charger Rack AC input volt: AC380V or 220v AC current:AC 5A
LED Mining Light Charger Rack
Specifications:
KCLA series rack charger uses advanced electronic technology.It is definite-purpose rack charger for lithium battery miner lamp series.The rack charger is made up of rack.. power system intelligent-control charging module and special insert setting. The rack consist rolled sheet metal. Spray-paint.has nice surface and outstanding antisepsis. The intelligent-control charging module which realized to charge with steady current and limited voltage has the function of preventing over-charging and over-discharging. Current and short circuit protection.indicating charging state etc. The rack charger can fully automatic operate for charging process without being from electricity wave fluctuation and load ,It has high charging efficiency.Technical Parameters
Model No. | KCLA-102 |
AC input volt | AC380V or 220v |
AC current | AC 5A |
Module input | DC 6.5-12.V |
Module output | DC 4.2±0.05V |
Module output current | DC 1 ±0.05V |
Output ripple | 50MVP-P |
Module input under-voltage protection | 6.5V |
Module input over-voltage protection | 12.6V |
Charging lights | 102pcs |
Special features:
1.each charging contact has a charging module with such function as data sampling.intellingent IC idenification voltage control.conversion and short-circuit potection.It can control the charging of miner lamps comprehensively2.The product works properly at a voltage of ac 150-260v.380v.it is characterized by stable performance and strong anti-interference and shock resistance. With dual LED mains and charging output indication.it has such advantages as short charging time and high charging efficiency.In the course of charging. The heat produced is little and energy loss is low.thus prolonging the service life of miner lamps effictively.3.each charging contact has a built-in high-precision sampling circuit with the function of short-circuit.over-temperature and over-voltage protection.The circuit makes real-time abnormality Judgment for each miner lamp during charging.
4.Chargind can be conducted only after cell voltage and protection circuit are found normal by chargind contacts when the lamp holders are fastened to connect the loop.5.The automatic conversion of constant current and constant voltage can be realized whten each miner lamp is charged through automatic data sampling.in the way.each miner lamp can realize the best charging effect.6.No converse leakage current and voltage. It is not required to disconnect the positive and negative electrodes of lamp holders in case of the power failure of equipement.7.with the feature of full-automatic operation.it is simple to use.special operator is not required so that maintenance expenses can be saved.8.our company may produce the charging equipment of various specifictions and parameters according to clients.(such as 24type,36type.54type.60type.102type. and go on)
LED Mining Light Charger Rack
