Filtr bag cage welding line
Non-stop cage welding,OD100-200MM.
Easy line setup
54 cage pitch settings
SS MS & GI wires ZGTEK
Filter bag cage Welding Line
Line setup is as shown below:
No | Item | Model No | Remarks | 1 | Wire straightening machine | TZ2.8-5 | | 2 | Ring making machine | DQ1000K | | 3 | Butt welder | UR-40 | UR-40 is recommended to weld MS, GI wire rings, ARW Argon Arc welder/TIG welder is recommended to welder SS rings | 2-3 | Ring making and butt welding integrated machine | R-6-400 | High throughput and easier operation | 4.1 | 24-wire cage welding machine | DLN-24-5 | 8, 10, 12, 14, 16, 18, 20 24 wires; OD: 100-200mm | 4.2 | 16-wire cage welding machine | DLN-16-5 | 8, 10, 12, 16 wires; OD 100-160mm | 5 | Top cap welder | DS-50/DS-80 | DS-80 is recommended when the power source voltage is relatively low and/or when welding zinc-plated wires | 6 | Bottom cap welder | DX-50/DX-80 | DX-80 is recommended when the power source voltage is relatively low and/or when welding zinc-plated wires |
|
Note: The six types of machines in the above table are the basic configuration of a cage welding lineChoose either 4.1 or 4.2 depends on the applicationChoose 2 and 3 or 2-3 depends on the capacity requirementIn case of setting up three or more lines, top cap welder, bottom cap welder, wire straightening machine and ring making machine can be shared |
No | Item | Model No | Remarks | 1 | Wire straightening machine | TZ2.8-5 | | 2 | Ring making machine | DQ1000K | | 3 | Butt welder | UR-40 | UR-40 is recommended to weld MS, GI wire rings, ARW Argon Arc welder/TIG welder is recommended to welder SS rings | 2-3 | Ring making and butt welding integrated machine | R-6-400 | High throughput and easier operation | 4.1 | 24-wire cage welding machine | DLN-24-5 | 8, 10, 12, 14, 16, 18, 20 24 wires; OD: 100-200mm | 4.2 | 16-wire cage welding machine | DLN-16-5 | 8, 10, 12, 16 wires; OD 100-160mm | 5 | Top cap welder | DS-50/DS-80 | DS-80 is recommended when the power source voltage is relatively low and/or when welding zinc-plated wires | 6 | Bottom cap welder | DX-50/DX-80 | DX-80 is recommended when the power source voltage is relatively low and/or when welding zinc-plated wires |
|
Note: The six types of machines in the above table are the basic configuration of a cage welding lineChoose either 4.1 or 4.2 depends on the applicationChoose 2 and 3 or 2-3 depends on the capacity requirementIn case of setting up three or more lines, top cap welder, bottom cap welder, wire straightening machine and ring making machine can be shared |
Filter Bag Cage Welding Line