Alumina Ceramic Foam Filter 1.High thermal shock resistance 2.150000ft3 capacity 3.Size:7",9",12",15",17",20",23"
1. Introduction:
Foam Ceramic are mainly used for filtration of aluminium and aluminium alloys in foundries and cast houses . With their excellent thermal shock resistance and corrosion resistance from molten aluminum, they can effectively eliminate inclusions, reduce trapped gas and provide laminar flow, and then the filtered metal is significantly cleaner. Cleaner metal results in higher-quality castings, less scrap, and fewer inclusion defects, all of which contribute to bottom-line profit.
2. Size available:
7", 9", 12", 15", 17", 20", and 23", with porosities from PPI 10 to PPI 60(PPI ie pores per inch).
Other special sizes could be produced on request.
3. Chemical Composition:
| Al2O3 | SiC | SiO2 | ZrO2 | Others |
| 80~82% | --- | 5~6% | --- | 12~15% |
4. Physical Properties:
| Working | ≤1200°C |
| Porosity | 80~90% |
| Compression Strength (Indoor Temperature) | ≥1.0Mpa |
| Volume Density | ≤0.5g/cm3 |
| Thermal Shock Resistance | 800°C---Indoor temperature 5 times |
| Application | non-ferrous and alumina alloys, high temperature gasfilter,chemical fillings and catalysis carrier |
Alumina Ceramic Foam Filter
