fence posts/fittings 1.material:steel 2.Forged steel body. 3.all sizes,colors,models,ISO9001:9002. 4.best quality
| Materials Needed for Residential Chain Link Fence | |||
| Description | Picture | Quantity to Use | Quantity to Buy |
| Fence Fabric | Usually sold in rolls of 50 feet | ||
| Top Rail | Total footage of fence less gate openings | ||
| Line Posts (intermediate posts) | Divide total footage by 10 and round up (see chart below) | ||
| Terminal Posts (end, corner, and gate posts) (usually larger than line posts) | As required (2 for each gate) | ||
| Top Rail Sleeve | 1 for each length of plain top rail. Not required for swedged top rail | ||
| Loop Caps | Use 1 per line post (two styles shown left) | ||
| Tension Bar | Use 1 for each end or gate post, 2 for each corner post | ||
| Brace Band | Use 1 per tension bar (holds rail end in place) | ||
| Rail Ends | Use 1 per tension bar | ||
| Tension Band | Use 4 per tension bar or 1 per foot of fence height | ||
| Carriage Bolts 5/16" x 1 1/4" | Use 1 per tension or brace band | ||
| Post Cap | Use 1 for each terminal post | ||
| Fence Tie / Hook Ties | 1 for every 12" of line posts and 1 for every 24" of top rail | ||
| Walk Gate | |||
| Double Drive Gate | |||
| Male Hinge / Post Hinge | 2 per single walk gates and 4 per double drive gate | ||
| Carriage Bolts 3/8" x 3" | 1 per male hinge | ||
| Female Hinge / Gate Hinge | 2 per single walk gates and 4 per double drive gate | ||
| Carriage Bolt 3/8" x 1 3/4" | 1 per female hinge | ||
| Fork Latch | 1 per walk gate | ||
Useful tools for installing chain link fence Tape MeasureLevelPliersWire CuttersSledge HammerPost Hole DiggerWheelbarrow, Shovel and Hoe to Mix and Transport ConcreteHacksaw or Pipe CutterString / Mason Line and StakesCrescent WrenchFence Stretcher (ratchet type power pull, block and tackle, or similar device may be used. Most wire stretching tools can be borrowed or locally rented.)
Notes: Post depth can be determined by local weather and soil conditions, terminal posts are normally dug 10" wide and 18" to 30" deep. Depending on the wind and soil conditions you may want to use 8' centers or even a more narrow spacing for line posts. You may want to use longer line or terminal posts depending on the wind and soil conditions in your area. If you want to add privacy slats in the future, make sure the frame work will be strong enough for additional wind load.
We have a wide choice for customers like T-psot, U-post, round pipe post, Y-post etc.
Either in painted or powder coated, the full range of fittings also available.
All this made consumers more easier to erect their fence or wire panel.
Others may also available upon request.
Tel: +86-0311-89901296
Fax:+86-0311-67690536
Trademanager:cn1000211423
Please feel free to contact me if any questions.
Fence Post/Fittings (manufacturer)
