1.HFO/DO supply and booster 2.standard and customized designs 3.clear and easy control panels 4.stable viscosity control
(1)Fuel supply unit is the fuel control equipment before the fuel enters into internal combustion engine,when the fuel goes through the supply unit inside,it can remove partial mechanical impurities and ensure that the pressure,flow,viscosity or temperature,and the fuel meet the requirements of internal combustion engines.
(2)This unit is composed of oil feed pump,circulating pump ,strainer,fine filter(auto or half-auto filter),flow meter,mixed oil tank.heaters(by steam,by hot oil or hot water,by electricity or other media).Viscosity or temperature control system,valves,instrumentation and electrical control system etc.
(3)Its essential function lies in control the viscosity of the fuel by executer like switches from valves or electricity heater or conducted capacity to control the thermal volume of heat,thus to control the viscosity or temperature precisely after transforming the valued viscosity signal from the sensor to controller,which can guarantee the diesel engine run in best condition.
(4) integrates oil feed pump,circulating pump,strainer,auto filter or duplex backwash filter,flow meter,mixed oil tank ,composite heating device,viscosity and temperature control system with the technique data .
Parameters model | Rated oil supply(m3/h) | Rated output(m3/h) | Rated supply pressure (MPa) | Range of viscosity control theory (cst) | Rated control range of viscosity (cst) | Auxiliary heating device | Dimensions LxBxH(mm) | Power | |
Power(kw) | Control | ||||||||
KHVU-B(C)II-0.6E-C | 0.6 | 1.1 | 0.6 / 1.0 | 0~50 | 9~15 | / | / | 2000×1400×1800 2200×1400×1800 | 380V/50Hz
or
440V/60Hz |
KHVU-B(C)II-1.0E-C | 1.0 | 1.6 | 0.6 / 1.0 | 0~50 | 9~15 | / | / | 2000×1400×1800 2200×1400×1800 | |
KHVU-B(C)II-1.2E-C | 1.2 | 2.0 | 0.6 / 1.0 | 0~50 | 9~15 | / | / | 2000×1400×1800 2200×1400×1800 | |
KHVU-B(C)II-1.8E-C | 1.8 | 3.0 | 0.6 / 1.0 | 0~50 | 9~15 | / | / | 2000×1400×1960 2200×1400×1960 | |
KHVU-B(C)III-1.0E-C | 1.0 | 1.6 | 0.6 / 1.0 | 0~50 | 9~15 | 4KW×3 | Automatic control classification | 2000×1400×1800 2200×1400×1800 | |
KHVU-B(C)III-1.2E-C | 1.2 | 2.0 | 0.6 / 1.0 | 0~50 | 9~15 | 6KW×3 | Automatic control classification | 2000×1400×1800 2200×1400×1800 | |
KHVU-B(C)III-1.8E-C | 1.8 | 3.0 | 0.6 / 1.0 | 0~50 | 9~15 | 8KW×3 | Automatic control classification | 2000×1400×1960 2200×1400×1960 | |
KHVU-B(C)III-3.0E-C | 3.0 | 4.8 | 1.0 | 0~50 | 9~15 | 12KW×3 | Automatic control classification | 2200×1400×1960 2400×1500×1960 | |
KHVU-B(C)III-5.0E-C | 5.0 | 8.0 | 1.0 | 0~50 | 9~15 | 12KW×4 | Automatic control classification | 2300×1400×1960 2600×1600×1960 | |
HFO supply and booster module
