Welcome to ECBAY
MCH-2816A LCR meter 200KHz continuously test frequency meter
MCH-2816A LCR meter 200KHz continuously test frequency meter

1.50Hz-200Khz continuously frequency, 12000 test points 2.0.1% basic accuracy 3.inductance,capacitance&resistance test

Digital LCR meter, 200KHz lcr meter, MCH-2816A, high precision  

MCH2816A precision LCR meter is an impedance tester with high precision and wide testing range and sixs test resolution. It has high test frequency of 300kHz and 0.01Hz stepping arbitrary programming, and it has 10mV-2V signal level, all making it meet the precision test requirements of production line quality control, in-coming inspection and lab. Its HANDLER, RS232c interfaces are used for the component automatic sorting system, which provides the conditions for computer telecommunication and test recording. Flexible frequency-response analysis:Due to non-ideal inductor, capacitor and resistor, in order to precisely evaluate the characteristics of one component in one frequency band, MCH2816 could use its signal generation ability with 10mHz resolution to correctly analyze frequency response of the component parameters in any frequency band. In particular, it can do the precise measuring of the resonant impedance of the low-frequency ceramic resonant devices which has wide impedance range.

 

 

Technical index

 

Test functions

Test parameters

Z, C, L, X, B, R, G, D, Q, θ

Basic precision

0.1%

Equivalent circuit Mathematical function

Serial, parallel Absolute error, percentage error

Range mode

Automatic, hold

Trigger mode

Internal, manual, outside, bus

Test speed

Slow: 650msMiddle: 90msFast: 32ms

Calibration function

Open-circuit, short-circuit, load calibration

Test ports

Five ports

Average times

1-255

Display mode

Direct reading, ABS, %, V/I(voltage/ current test), selector counting

Display

240x 128 dot-matrix graphic LCD display, six digits resolution

Test signal

Test signal frequency

20Hz-200kHz, 0.01Hz stepping arbitrary programming

Test signal level

0.01Vrms-2.0Vrms, 0.01V stepping arbitrary programming

Signal output impedance

30Ω,100Ω alternative

Test display range

Z, R, X

0.00001Ω-99.9999MΩ

C

0.00001pF-999.99mF

L

0.00001μH-9.99999kH

G,B

0.00001μs-999.999s

D

0.00001-9.99999

Q

0.00001-99999.9

θ(DEG)

-179.999°-179.999°

θ(RAD)

-3.14159-3.14159

%

-999.999%-999.999%

Comparator and interface

Comparator

10 selectors, 9 qualified, 1 unqualified. The other one is supplementary.

Interfaces

RS232C, HANDLER

MCH-2816A LCR meter 200KHz continuously test frequency meter

Ads by Google


About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.