Features: 1 Variable Voltage 3.0V~6.0V; 2 Variable Watts: 3W-10W; 3 Built-in three digital display; 4 Current protection

LATEST NEW ARRIVAL!!!

IMotion3 V+ is a microprocessor controlled e-cigarette that lets you adjust the voltage and watts in seconds with just a few button press.

 

Newest Variable Voltage and watts E-cigarette, IMotion3 V+

Exclusive Electronic Cigarette Newest on Market:

Features:

1 Variable Voltage 3.0V~6.0V; Variable Watts: 3W-10W

2 Ultra-low static current;

3 Built-in three digital display tube;

4. Adjustable positive pin in the center of the thread, can fix the poor connection problem;

5. Preserved previous settings once you change the battery or take off the battery;

6.Display the actual output voltage when vaping;

7 Amperage limiting system protects against over current situations;

8 Reverse battery protection keeps circuit safe if the battery is installed backward;

Usage:

Assembly the battery and Cartomizer/atomizer with smoke juice correctly. Standby is started after the device is not working within 5 seconds;

1 Power switch:

Press the centre button(red button) above 3s, it will be Power on/off. When the power is off, the device will stop working. When it is ON, press the centre button, it will show battery voltage, for example, 3.7V will display “3.7U” .

2 Lock protection:

Press "-" and "+" button at the same time above 3 seconds, the setting will be locked or unlocked.

3. Resistance,Voltage and Wattage Setting Instructions:

Press the big button 5 times to start the setting choice mode, then press the button "-" or "+" to choose the setting mode: "1.dR"-Display resistance, "2.dU"-Display Voltage,"3.dP"- Display wattage. After that press the big button or leave button 1.5s to confirm the choice.

3.1 Under the "1.dR"mode, press the big button again, the display shall show the resistance of the Cartomizer/atomizer, for example, 4.0Ω will display “4.0o”. if without Cartomizer/atomizer, it will show F1.

3.2 Under the "2.dU"mode, press the "-" or "+" button to adjust voltage up or down in a circle of 3V~6V,with 0.1 volt increments, for example, 3.7V will display “3.7U”. then press the big button again or wait for 3s, the display is off, your setting is preserved.

3.3 Under the "3.dP"mode, press the "-" or "+" button to increase or decrease of the wattage in a circle of 3P~10P,with 1watt increments, for example, 9W will display “9.0P”then press the big button again or wait for 3s, the display is off, your setting is preserved.

We Shall exhibit at 2013 Las Vegas International CES

    Date: Jan8-11,2013    Booth No.: 72328 of Hall D - go into from Venetian Ballroom Welcome to visit us!!!

Cigstar Variable Volt and watt e cigarette mod IMotion3