Network Cable Tester JV505E 1.Portable design 2.Accurate testing results 3.Quality warranty 4.Copetitive price
NETWORK CABLE TESTER JV505E
Function:
1. Tester for cables of RJ45, UTP, STP, FTP
2. Power supply: DC 9V reduplicated battery
3. Electricity-consuming: 20mA
4. Dimension: 10.5x10.5x2.6mm
Operation:
1. BNC cables
(1) Put one end of cable into both main tester and BNC socket, and put another into the remote tester.
(2) Switch on the power, which works if the light is on
(3) BNC light will not be on when the cable is connected. Any flash of the light means an improper cable is connected.
(4) Press the button on the left of the main tester. If the light is green, the cable works. If not (means red or any other color of light), the cable is out of work.
2. Twin-twisted Cables
(1) Put one end of the cable into the main tester
(2) Switch on the power, which works if the light is on
(3) Once switched on, LEDS of the remote tester will scan the cable accordingly. If the cable is good, the corresponding LEDS will turn green. If the cables are out of work, the LEDS will firstly turn green then red or other colors, or the LEDS will not be on.
(4) If the cables are shielded, shielding test when GND is turned on. If shielding is normal, the corresponding LEDS and GND will turn green. If not, the LEDS will firstly become green then red or will not be on at all.
Network Cable Tester JV505E
