Introduction Cable Identification Instrument ADE-III is designed to identify single and multi-core cables, which is easy to use and robust. ADE-III is a daily using tool for cable maintenance workers. ADE-III comprises a current pulse generator, a receiver and connecting tongs and cables. When it works, the generator sends a series of pulses with a peak value of 65A into the cable to be identified. This creates a magnetic field around the target cable, and use the coupling clips to induce. Then the pulse direction and current flow will be shown on the receiver, so that the operator can identify the cable safely and reliably. Arrow indication will be shown on the clips, the green LED will light when the direction of the arrow is as same as the pulse current of generator, it means the cable is which carries pulse current. In contrast, it isn't the cable when the red LED lights. Technical Data Generator Pulse voltage 40V Pulse peak current 65A Pulse sequence 1 15/min Pulse sequence 2 30/min Power supply 1 220V,50Hz Mains Power supply 2 12V rechargeable battery pack Operating time 3-6 h Charging time 1.5-5 h Dimensions L 300mm×D 100mm× H 200mm Weight 6.0kg Identification Receiver Modes of operation active, passive, battery checking, shutdown Gain level 5 level Indication analogue meter Interference Suppression multiple Alarm LED indication,piezoelectricity acoustic alarm beeper Power supply 6V rechargeable battery pack Operating time 30 h(active mode) Dimensions L 210mm× D 100mm× H 50mm Weight 0.6kg Identification tong Insulation voltage 1kV Dimensions 150×100mm Weight 0.75kg