Arrester Discharge Counter Test Rod Lab Test Equipment 1.easy to operate on site 2.protable & high precision 3.full-automatic
TE1100 Arrester Discharge Counter Test Rod, Lab Test Equipment
Application
TE1100 Arrester Discharge Counter Test Rod is well-designed based on the needs of electric users. Products with good appearance, and easy to carry, which replaces the traditional bulky test equipment and test methods for zero and this counter arrester test welcomed by the majority of professionals.
Operation method and features
End of the instrument before use, and connected into the ground, the height is not based on the counter before power stretching head outto the appropriate length of the conducting rod Before using, insert the grounding line to the end of the instrument and connect well. According to the height of the counter, pull the telescopic conducting rod of the head to a suitable length..
Power switch is located in between the body and the head, rotate 90 degrees in any direction, when heard "clicks" sound means powered on, otherwise the power is turned off. Green light will shining after powered and wait for about 3 ~ 5 seconds you can conductive rod of the heads and test the arresters counter.
The instrument need not be shut off the power supply and can repeat to test (each charge conductive rod should leave the test product.) After completion of test, first turn off the power supply, then the head end of conducting rod discharge to the end grounding line , then pick up the instrument.
The device consists of four pieces of 1 type batteries, which can support more than 2,000 times the discharge test. If the battery extend the charging time that means the battery is in the states of low power, and should be replaced.
Technical parameters
Power supply: DC 6V (4 pieces of 1 type batteries)
Output voltage: 800~1000V
Weight: 780g
Geometry size: φ36×375, the head isφ50×100
Arrester Discharge Counter Test Rod Lab Test Equipment