1.BGA rework station 2.Top hot air 3.bottom hot air and IR. 4.Three heater control temperature more accurate
BGA rework station
1. With three independent temperature zone control, upper and bottom main heater with hot air to heat, third zone with infrared to preheat;
2.Upper heater with 8 segment temperature up (down)+8 segment constant temperature control, can store 10 groups temperature curve; Upper, bottom heater and infrared start heating at the same time;
3.Three temperature zone with independent PID to control heating process, more stable and accurate;
4.Bottom heater and IR preheating zone with supporter to prevent PCB part deformation;
5. After remove and solder, using high-volume fan to cool the PCB board, prevent deformation of PCB board and ensure the effect of soldering;
6.Equipped with a variety size of hot-air nozzle, or made according to special requirements, free rotation of hot air nozzles;
7.Build-in vacuum pump, no need gas source.
SPECIFICATION
PCB Size | ≤L540 ×W 450mm |
PCB Thickness | 0.1~5mm |
Temperature Control | K Thermocouple, Closed loop |
PCB Positioning | Outer |
Sub (Bottom) heater | Infrared 2400W |
Main (Top) heater | Hot air 800W+800W |
Power supply | Single phase 220V,50/60Hz,3.4KVA |
Machine dimension | L700 ×W475×H520mm |
Weight of machine | Approx.33kgs |
BGA rework station