Rigid to Rigid Lamination Machine for Touch Panel The machine is used for laminating cover lens and ITO/LCD.
PW-M1038 Rigid to Rigid Lamination Machine for Touch Panel
Machine Function
1.1 The machine is used for rigid to rigid lamination. Manually load and unload cover lens and ITO or LCD.I
TO or LCD position by fixture. After finished position, press start buttons by both hands and work stage
move inside. Then sealed container will seal the stage. When negative pressure reach setted value, lamination
work begin.
1.2 It is applicable to laminate cover lens onto 2.8'~10.2' LCD or ITO. (Rigid to rigid lamination)
1.3 Optional left stage and right stage operation or double stages for alternative work.
Basic Parameters
Weight(Kg):Appro. 400KG
Dimension(mm):(W)900 x (D)810 x (H) 1640mm
Work Table Size:300×350mm
Power Supply: 3phaseAC380V/50Hz/2KW
Laminating Product Size:2.8″~10.2″
Laminating Accuracy (mm):≤±0.05mm
Operation Mode of Work Table:In-out double stations
Ambient Requirement:Clean without dust, clean room.
Heat Temperature Range:25~100°C
Work Pressure:0.40~0.70Mpa
Production:60ses/4pcs, that is to say, production will be 4800pcs/day according to 20hrs/day.
Base on 3.5' hard to hard standard testing.Single circle time is 60 secs.
Rigid to Rigid Lamination Machine for Touch Panel
