400 MHz MIPS processor Linux Operating System 2 x LED - display MPEG-2 / H.264 Hardware decoding Tuner: DVB-S2

 

Specifications:

400 MHz MIPS processor Linux Operating System 2 x LED - display MPEG-2 / H.264 Hardware decoding Tuner: DVB-S2 1 x Smart Card Reader (Dreamcrypt CA) Service Mini-USB 10/100Mbit Ethernet Interface 1 x Scart (RGB, FBAS or S-Video) HDMI 2 x USB 2.0 analog modem S/PDIF Interface for digital bit stream out (AC-3) 64 MByte Flash, 256 MByte RAM unlimited channel lists for TV/Radio channel-change time < 1 second automatic service scan directly bouquet-lists EPG (electronic program guide) multiple LNB-Switching control (supports DiSEqC) OSD in many languages and skin-support Teletext Decoder External 12V power supply

DreamBox DM500HD Technical Data

DBS-Tuner DVB-S2:

Frequency Range: 950-2150 MHz Demodulation: DVB-S (QPSK) / DVB-S2 (8PSK,QPSK) Symbol rate DVB-S: 2-45 Mbaud/s, SCPC / MCPC DVB-S2: 10-31 Mbaud/s (8PSK), 10-30 Mbaud/s (QPSK)

Video decoder:

Video Compression MPEG-2 and MPEG-1 compatible, H.246 Video Formats 4:3 / 16:9 Letterbox for 4:3 TV-Device

Audio decoder:

Audiokompression MPEG-1 & MPEG-2 Layer I and II, MP3 Audio Mode Dual (main/sub), Stereo Frequency: 32kHz, 44.1kHz, 48kHz, 16kHz, 22.05kHz, 24kHz

Output analog:

Output Level L/R 0,5 Vss on 600 Ohm THD > 60 dB (1 kHz) Crosstalk < -65 dB

Output digital:

Output Level 0,5 Vss on 75 Ohm Sampled Data Filtering 32kHz, 44.1kHz, 48kHz S/PDIF-Output optical, Toslink

Video output:

Output Level 1 Vpp + / - 0.3 dB on 75 Ohm

Video parameter:

Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm Teletext filter in conformity with ETS 300 472 Standard

TV-Scart:

Output: FBAS, RGB, S-Video

Ethernet:

10/100 MBit compatible interface Function: Update of Firmware

Analoge modem:

analoge modem for Internet connection

LNB power and polarisation pertuner:

LNB Current 500mA max.; short-circuit-protected LNB Voltage vertical < 14V no load, > 11,5V at 400mA LNB Voltage horizontal < 20V no load, > 17,3V at 400mA LNB shut-off in standby mode

Number of active satellite position:

DiSEqC 1.0/1.1/1.2 and USALS - Rotor Control

Power consumption:

< 12W at 12V operation < 1W Standby

External power supply:

Input:110-240V AC / 50-60Hz / 0,6A Output:12V = / 3,0A

Physical specification:

Ambient Temperature: +15°C to +35°C Humidity: < 80% Dimensions (W x D x H): 195 mm x 130 mm x 40 mm Weight: 1,8 kg (without HDD)

DM 500HD HIGH DEFINITION SATELLITE RECEIVER