Welcome to ECBAY
C/Z purlin exchangeable roll forming machine
C/Z purlin exchangeable roll forming machine

This C/Z purlin exchangeable roll forming machine can produce two type of purlin, C type and Z type.

Detailed technical requirement on machine

The whole machine contain:

- 6 tons electric uncoiler

- Coils sheet guiding and leveling device

- Hole punching department (2 sets punching mould)

- Main forming department

- Hydraulic station

- Plc control table

- Runout support table(2 set*3m/set)

- Safe cage for the main forming roller department.

Detailed parameter:

1)      Raw material

- Raw material: hot roll steel, yield strength: ≤300Mpa

- Raw materials thickness:1.6-3.2mm

- The Max. width of the raw material this machine can make:560mm

- The Min. width of the raw material this machine can make:230mm

2)      Machine’s parameter

- Uncoiler’s loading capacity Max. 6 tons

- Main motor power:15kw,

- A 3kw motor for guiding department, 3sets of 1.5kw motor for PLC control the transversal moving.

- Hydraulic power: 7.5kw

- Machine’s running speed: about 17m/min( without hole punching)

- Main forming roller material: GCr15 mould steel

- The material of roller shaft: No.45 steel,

- The material of cutting blade: Cr12 mould steel

- The material of hole punching mould: Cr12 mould steel

C/Z purlin exchangeable roll forming machine

Ads by Google


About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.