This double rollformer have good appearance,good qualitry,durable and strong.it can product two profile drawing
1.Rool forming machine Introduction:
The double deck roll forming machine consists of uncoiler and its base, coil sheet guiding equipment, film covered device, roll forming system, post-cutting equipment, hydraulic station, controlling system andsupporter table.
2.Equipments compoments: feeding platform shearing mechanism hydraulic system computer control system glazed tile stamping machine options: various tonnage average uncoiler holder hydraulic uncoiler
3.Technical Parameters:
| Material spec | colored steel sheet, galvanized steel sheet |
| Thickness of coil sheet | 0.4 - 0.8mm |
| Main motor power | 5.5kW |
| Forming speed | 13m/min |
| Hydraulic station power | 10 - 12Mpa |
| Controlling system | PLC |
| Index error of length | 10m - 2mm |
| Total weight | about 5,200kg |
| Voltage | 380V 3 phase 60Hz or at buyer's requirement |
| Quantity of stands | upper 9groups under:10 groups |
4. Material Of Main Equipment
Roller material | high grade NO.45 forged steel, plated hard chrome on the surface of roller with thickness 0.05mm |
| Active shaft material | high grade NO.45 carbon wrought steel at diameter 75mm |
| Cutter blade | Cr12 mould steel with quenched trestment. |
| Frequency converter | adopt Mitsubishi |
| Computer operating screen | adopt MT506MV |
| PLC | computer adopt PLC |
5.Process Flow:
Decoiling ----Loading----Molding---Profiling---Cutting off---Discharging.
double deck roll forming machine
