manufacturing galvanized coil roll forming machine metal floor deck roll forming machine compositate deck roll forming machine manufacturing galvanized coil roll forming machine
1. Work Flow
De-coiler—feeding --roll forming----cutting the panel---- table supporter
2. Plate Diagram( Profile Drawing)
Thickness of the coil: 0.8-1.2mm
3. Main machine components
3.1. Simple de coiler
3.2. Feeding and guiding device
3.3. Roll forming machine
3.4. Cutting device
3.5. PLC cabinet
3.6. Hydraulic station
4. Introduction of main equipment structure
4.1. De coiler: simple one, max load is 5 T
4.2. Main frame:
Ø Forming speed: no more than 12/min( adjustable)
Ø Forming steps: 26steps
Ø Machine sheet: all adopt China standard 36# H-section steel after welding
Ø Material of shaft: 45# steel
Ø Diameter of shaft: 90mm
Ø Material of rollers: bearing steel
Ø Types of bearing: 6212
Ø Main power:11KW*2
Ø Driven style: by 1.2” chain
Ø Hydraulic power : 5.5KW
4.3. Cutting part:
Ø Cutting after forming, the length according your needs
Ø Cutting operation: the machine will be stop automatic, then cutting, and keep working after cutting
Ø Cutter material: Cr12, after heating treatment
Ø The error of the length: +/- 2mm
4.4. Control system:
Ø Automatic to calculate the length
Ø Automatic to record the sheet number
Ø Setting the length and the quantity, then automatic cutting the panel and it will stop when arrival your setting
Ø Simple operation, automatic to change the rrror of the size.
Ø Display the finish production quantity.
Ø Electric pressure: 380V, 50 Hz, 3-phase
manufacturing galvanized coil roll forming machine
