YX48-200-600 closed deck floor roll forming machine

Our company customized various kind of deck floor plate ( steel bearing plate) roll forming machine

The advantage of  forming machine

Rolling galvanized steel plate, the section will be V type, U type, trapezoid or other wave shape. It is suitable for exhibition hall, steel structure factory, warehouse, steel structure building, airport, railway station, odium, super market, logistics center, Olympic Stadium etc.

Technical process

decoiler- guiding&feeding- roll forming- cut to length- discharge

Technical parameters about  hydraulic motor drive forming machine

Rolling speed: 8-10m/min         

Raw material thickness:  0.9-1.2 mm            

Raw material:choi steel ,galvanized steel sheet                 

Raw material width:1000mm             

Forming roll:36 rollers

Roll materials: 45# steel

Roll surface coating hard chromium: 0.05 mm               

Diameter of Main shaft:80mm  

Spindle materials:45# seel          

Main power :22kw                 

Reducer: Cycloidal motor reducer

Drive: by gear chain

Finished cutting: automatic hydraulic cut off      

Hydraulic cut:3kw                    

Controller: PLC auto system

Host structure: wallboard structure        

Overall dimensions: abt. 18000*1500*1300mm 

Machine weight: abt. 16500-17500kg      

THE characteristics and structures of  main structure

1,Main structure characteristics

a, Simple structure and beautiful outlook, rack adopt h-beam welding base, wallboard structure, overall intensity high, Suitable for the high intensity load.

b. Equipment other important Components adopt domestic famous enterprises and effectively ensure the equipment performance from surface.

c, using full-automatic fixed-length molding blunt type and cut off, fixed-length accurate location, strip shape head and tail beautiful tidy, changeless form.

d, The installation and debugging of equipment is convenient and equipment is suitable for factory , construction site to produce.

e, The Noise of equipment is low and high efficiency.

2,Main characteristic of deck floor plate(steel bearing plate):

a, Powerful concrete wrapped shear: peculiar design of the close rib type, the good property longitudinal sheer .b, Superexcellent fireproof performance : the arris of slab completely wrapped by concrete, looks like the  rebar in on-site concrete, the arris of slab Can completely replace the  positive bending moment the tensile reinforcement ,and that not having to spary refractory coating can reach 1.5 hours refractory limitation

 c, The superiority of the composite floor cross-section: having greater floorslab effective height and composite stage,providing bigger the positive bending moment ability of resistance

d, Board DeKa groove suspension system: providing the installation and use for smallpox, condole top and hydropower tube, do not need to drilling, electric welding, in building use period, but according to need any mobile, removed or reinstall it

e,Construction is simple and quick: ends does not need any bulkhead, no leaking slurry phenomenon, can shorten the construction period.

f,Flat bottom appearance: soffit is smooth,it is more beautiful that the building don’t need suspended ceiling.

g, Can effectively reduce floor height:The thickness of close type composite floorslab is only 110 –total-130mm, ,The thickness of close type composite floorslab reduce 30-40mm than open mouth , reducing cost, increasing headroom.

1, Low cast:the The rebar of positive bending moment by bottom of close composite flateslab bearing is taken the place of close type corrugated steel sheet,needs not to spray fire retardant coating,reduces reinforcement dosage,cost down.

2,Equipment composition

1)Put rack: a set

2)Molding host: a set

3)Finished cut institutions: a set

4)Electric control cabinet: a set

5)Hydraulic system: a set

6)Bracket: a set