Welcome to ECBAY
ARM NXP LPC1768 Development Board + 3.2" TFT LCD Module,ARM Cortex-M3 NXP LPC1768
ARM NXP LPC1768 Development Board + 3.2" TFT LCD Module,ARM Cortex-M3 NXP LPC1768

--ARM NXP LPC1768; --MCU: Cortex-M3; --Support: SSP,UART,AD/DA,TIMER,GPIO --3.2 inch TFT touch screen.

ARM NXP LPC1768 Development Board + 3.2" TFT LCD Module,ARM Cortex-M3 NXP LPC1768

Part A: ARM NXP LPC1768 Development Board

Features(MCU: Cortex-M3):* Processing rates of up to 100MHz, and includes a support eight areas of memory protection unit (MPU)* Built-nested vector interrupt controller (NVIC)* 512KB on-chip Flash program memory, to support in-system programming (ISP) and In-Application Programming (IAP)* 64KB SRAM for high-performance CPU through the instruction bus, system bus, data bus access* AHB multi-layer matrix with 8-channel DMA controller, general-purpose (GPDMA)* Support the SSP, UART, AD / DA, timer, GPIO, etc., can be used for memory to memory transfers* Standard JTAG test / debug interface and debug serial line and serial line tracking port option* Simulation trace module supports real-time tracking* 4 low-power modes: sleep, deep sleep, power-down, deep power-down* Single 3.3V power supply (2.4V - 3.6V)* Operating temperature: -40C - 85C* Non-maskable interrupt (NMI) input* On-chip integrated power-on reset circuit* Built-in systems beat the timer (SysTick), to facilitate the operating system migration.

Extensive on-board resources:* 2-Way RS232 serial interface (using the straight-through serial cable, serial port support them all the way ISP download)* 2 Road CAN bus communication interface (CAN Transceiver: SN65VHD230)* RS485 communication interface (485 Transceivers: SP3485)* RJ45-10/100M Ethernet network interface (Ethernet PHY: DP83848)* DA output interface (USB sound card can do experiments on-board speaker and speaker output driver)* AD input interface (adjustable potentiometer input)* Color LCD display interface (which can take 2.8-inch or 3.2-inch color TFT 320X240)* USB2.0 Interface, USB host and USB Device Interface.* SD / MMC card (SPI) interface (available with FAT12, FAT16, FAT32 file system)* IIC Interface (24LC02)* SPI serial FLASH interfaces (AT45DB161D)* 2 user keys, 2 function keys and the INT0 Reset button, 8 LED lights* 1 Five keys to enter the joystick (Joystick)* serial ISP download function (no need to set jumpers), the standard JTAG download, simulation debugging interface.* integrated USB emulator: simulation and debug capabilities to support online and support KEIL, IAR and other mainstream development environment.* optional external 5V power supply or USB input to provide 5V power supply.* leads all the IO, user-friendly external circuit to the secondary development of other applications.

Part B: Introduce for 3.2" TFT LCD Module

8-bit or 16-bit parallel bus interface,8-bit mode use 74HC573 latch low 8-bit (short R7 enable 8-bit mode), open R7 is 16-bit mode (default), use high 8-bit operation bus in 8-bit mode low 8-bit float, Support a ATMEL DataFlash AT45DBxxx series device, Can directly use AVR,PIC,C51,ARM.STM32 MCU driver.

ARM NXP LPC1768 Development Board + 3.2" TFT LCD Module,ARM Cortex-M3 NXP LPC1768

Ads by Google


About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.