Welcome to ECBAY
Electronic Accelerator Pedal
Electronic Accelerator Pedal

The electronic accelerator pedal apply widely on all kinds of buses and camion, special vehicles, engineering machinery, etc.

This electronic accelerator pedal applies widely on all kinds of buses and camion, special vehicles, engineering machinery, etc.


Programmable Electrical Sensor Integrated into Pedal assemblyNon-Contacting Magnetic Position SensorDual Load/Return Force GenerationCompact SizeWith high sensitivity and linearity, non-contact, reliable, long life, without noise, quick response. Reinforced plastic pedal, aluminum alloy soleplate, anticorrosion.Subject to over 10 million cycles between idle and full throttle position at a rate of approx. 100 cycles per minute.Pedal operation after the test and in compliance with the initial condition values.


. Horizontal deploy and stow.

. Wire driving system with electric motor.

.The step will be retracted automatically in case the step contacts obstruction when extending, then the step will be extended again. If the step contacts obstruction again, it will be retracted again. If it contacts obstruction for more than three times, it will be retracted and stop extending to ensure safety.

.Automatic operation

.The step operation is integrated with the door system.

.When the key switch is on, and when the door is opened, the step will be extended and when the door is closed, the step will be retracted.

.Material of the step and the cassette Aluminium, stainless steel and plastic.

Electronic Accelerator Pedal

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.