DX-2700 aa-aa Powder X-ray Diffraction Instrument is multi-function diffractometer with exceptional analysis speed, reliability

Introduction

DX-2700 θ-θ Powder X-ray Diffraction Instrument is multi-function diffractometer with exceptional analysis speed, reliability and reproducibility. The DX2700 is a diffraction instrument designed for the challenges of modern materials research. DX2700 can analyze powders, liquids, thin films, nanomaterials and many other different materials. The DX2700 can be used for many different applications: Academic, Pharmaceuticals, Chemical & Petrochemical, Material Research, Thin Film Metrology, Nano technology, Food & Cosmetics, Forensics, Mining & Minerals, Metals, Plastics & Polymers, etc.

Features

Computed tomography, High-resolution X-ray diffraction, High throughput screening, In-plane diffraction, Crystallite size and micro-strain analysis, Micro-diffraction, Non-ambient diffraction, Pair distribution function analysis, Phase identification, Phase quantification, Reflectivity analysis, Residual stress analysis,Crystallography, Texture analysis, Transmission, Thin film analysis.

DX-DWZ Combination of Eulerian cradle for stress and texture investigations, Thin film and Quantity Analysis attachment with control and analysis software with alignment-free feature.  

ADCX sample changer is compact and rugged. Integrated spinning improves particle statistics in polycrystalline sample measurements. Fully automatic alignment. Programmable 

Software

General diffraction data processing: automatic peak search, manual peak search, integral intensity, separation of Kα1,α2, background remove, pattern smoothing and magnifying, mulriple plot, three-dimensional plot and simulation of XRD pattern.

Qualitative Analysis: The data processing software has the search and match function on the base of whole profile and diffraction angle. The whole profile matching procedure employs the designed mode to do the qualitative analysis by reducing the search range from major, minor, to micro phase without indicating the diffraction angle. The diffraction angle matching procedure is based on the peaks position and intensity and usually used for the qualitative analysis of the data with large angle error. Quantitative Analysis: After the phase composition is determined, the content of each phase could be calculated with the help of RIR or/and the Rietveld refinement (Quantitative Analysis without criterion) Plot and Export: The data processing software is operated within the Windows interface. The preparing exported pattern could be labeled, zoomed in, zoomed out and also copied and pasted.Phase identification, structure analysis, Thin film analysis, stress investigation, Texture analysis are all available 

Parts and Specifications

X-ray Generator	Control mode	1kV/step, 1mA/step controlled by PC
	Rated output power	4 kW
	Tube voltage	10-60 kV 1kV continuously adjustable
	Tube current	5-80 mA continuously adjustable
	X-ray tube	Cu, Fe, Co, Cr, Mo et al (2 kW)Focus dimension: 1×10 mm2 or 0.4×10 mm2
	Stability	≤ 0.0005%  mains fluctuation
Goniometer	Goniometer	theta(θ)/theta(θ)
	Diffraction circle semi-diameter	285mm
	Scan range of θ	-3° to +160°
	Continuous scanning speed	0.006-96°/min
	Setting speed of angle	1500°/min
	Scan mode	θ-θ or θ, θ; Continuous or step scanning
	One way repeatability of θ	≤ 0.0002°
	precision of θd or θs	≤0.005°
	Minimal stepping angle	0.0001°
Record Unit	Counter	PC or SC
	Maximal CPS	5x10^6 CPS
	Proportion counter energy spectrum resolution	≤ 25%(PC), ≤ 50%(SC)
	Detectable high voltage	1500-2100 continuous tune
	High voltage of  the counter	differential or integral, automatic PHA, dead time emendation
DX-DWZ	System detector stability	≤ 0.01%
	Micro Structure	Micro Structure analysis, +/-0.5nm
	Micro-Diffraction	Micro sample or area, 2nm-19 um
Integrated performance	Dispersion dosage	≤ 1μSv/h
	Integrated stability of the system	≤ 0.5%
	Dimension	1000 × 800 × 1640 mm

X-ray Diffraction XRD instrument