special design for elevator door controller which can decide which floor to reach as a standalone unit
special design for elevator door controller which can decide which floor to reach as a standalone unit
Stand-alone proximity reader. Maximum 54 floors and combination of 2000 different floors to set and control.
It is able to set which floor to reach as stand-alone unit.
This reader needs to integrate with ST-18E Floor Controller
| | | Stand-alone model with built-in LCD display and keypad. Use with SE-18 Elevator Control. | | 16X2 STN LCD backlight display, 4 LED indicator lights, 2 photo-couplers input points, and 3 output points. | | 2x6 Stainless steel durable buttons, anti-acidity and salinity. | | Single (proximity or card number entry) or batch registration. | | New addition/registration or deletion can be made on a certain card. | | Tamper switch available. Alarm will be activated when it is being tampered or moved with force. | | RELAY output time from 01-99 seconds available to set. | | Fireproof polycarbonate material for outer casing (thickness of 3mm). Available in white or dark-gray. | | Special screws designed for both upper and lower covers, which require special tool to dismantle. | | 2,000pcs. card capacity, 8-digit card number. | | Two control modes: Proximity card and special system password. | | Power consumption: 150mA (standby); 180mA (operation) | | Maximum proximity distance: 15cm (125KHz), 5cm (13.56MHz) (depending on types of card). | | Frequency: 125KHz or 13.56MHz. Power supply: 12VDC±10% | | Operation temperature: 0~60°C; Humidity: 85%Rh max. | | Dimensions: 160 (L) x 100 (W) x 30 (H) (mm) | | Weight:225g | | Certification: CE |
|
|
high stability elevator access control system