Welcome to ECBAY
usb virtual oscilloscope, Mixed signal oscilloscope / Logic analyzer 18 channels
usb virtual oscilloscope, Mixed signal oscilloscope / Logic analyzer 18 channels

Operation system Windows 2000/XP/Vista Home Premium/Win 7 ( 32bits) Interface USB2.0 (USB1.1 compatible) Channel 18,

 Working user interface

Specifications

 Operation SystemWin XP/Vista Home Premium/Win 7(32bits)
InterfaceUSB2.0 (USB1.1 Compatible)
ChannelDSO 1CH,Logic Analyzer 18 CH, External Trigger In/Out x1
allows to stack up
Total Sample Memory4M bits/ Per channel 128Kbits
PhysicalDimension (device only)120*80*22 mm
SoftwareZoom In & Zoom Out1ns/DIV~10000S/DIV
LanguagesEnglish/Traditional Chinese / Simplified Chinese
Waveform Height,Pixel,ColorAdjustable
CursorTrigger Cursor=1/ auxiliary cursor=10/Voltage Cursor=4
MeasurementDigital: Period ,Frequency, Pulse Width, Average Width, Pulse Amount,Duty Cycle,Cycle Mean.
Analog: Vp-p, Vmax, Vmin,Vmean, Vrms, Positive overshoot, Negative overshoot, Rise time,Fall Time,Period, Frequency, Pulse width,Duty Cycle,Cycle       Mean, FFT.
Protocol DecodeUART,I2C, SPI
UpdateDriver ,Software,frame ware update
Special FunctionPower switch,RUN/STOP hardware button,LED of Status,allows to stack up
DSOInputInput CouplingDC, AC,GND
Input Impedance1MΩ±1% / 20pF±5%
Max. Input Voltage40Vpk (DC + AC peak)
VerticalVertical Resolution10 bits /channel 2mV/DIV- 5V/DIV
Sensitivity16μV
BandwidthDC to 60MHz
Range8 divisions
Time BaseSampling RateReal Time Sample rate 100MSa/s ( Equivalent sampling: 2.5GSa/s)
Time Base Range1ns/DIV to 5s/DIV
Pre/Post Trigger±128k points
Time Resolution1ns
Record Length2k points/channel to 128k points/channel
TriggerTypeRising, Falling,Either Edge, Ext and Logic Analyzer Trigger
ModeAuto,Normal ,Single and Force Trigger
Sensitivity0.008 division div or 1mv;
Trigger Level±4 divisions
MeasurementSpecial functionAuto set, Force Trigger,Self Cal
MeasurementVp-p, Vmax, Vmin,Vmean, Vrms, Positive overshoot, Negative overshoot,Rise Time,Fall Time, Period, Frequency, Pulse width , FFT.
Trigger Input/OutputEXT-TRIG Input Limitation/ TRIG-OUTTTL Level/5v pulse
Calibration OutputLevel /Frequency5V/1kHz ±0.5%
Logic AnalyzerTiming Analysis Sample Rate / State Clock Rate2Hz~200MHz /100MHz
Channels18 CH
Per Channel Memory Size, available channels128Kbits / CH (Allow To Select Memory 2K,16K,32K,64K,128K)
Sample Rate=200MHz= 18CH (DSO Off) Per Channel=256Kbits
TriggerResolution10ns
Channels18
Conditions/ LevelsDon't Care,Rise Edge,Fall Edge,Either Edge/1 Level
Pre/Post Trigger settingYES
Trigger Counter1~65535
Trigger Input /Output port (for Stack)TTL 5V
ThresholdRange/Resolution-6V ~ +6V/12mV
Maximum Input Voltage±30V
Impedance500KΩ // 10pF

usb virtual oscilloscope, Mixed signal oscilloscope / Logic analyzer 18 channels

Ads by Google


About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.