Waste Lubricating Oil Purification Machine 1Low cost 2Easy to operate 3.High quality refined oil 4.Envirionmental friendly
Waste Lubricating Oil Purification Machine
Because the waste oil contain too much contamination, including non-hydrocarbon, alkene, polycyclic aromatic hydrocarbon, metal hydronium, impurities, metal particles, asphaltene and colloid etc. and due to the traditional technology only can refine the waste oil to base oil, can’t use directly, so our company is researching the new technology about distilling machine, which can distill all kinds of waste oil into clean oil, easy to operation, and the lower operation cost.
Working principle
Waste Lubricating Oil Purification Machine adopt physicochemical actions to polymerize,passivate, absorb and eliminate impurities and harmful contamination. We research a new chemical alkaline complex catalyst, which can restore and regeneration the Waste oil to clean oil, save the component of the oil.
Advantage:
1. Low cost, cost is 30$ for refine one tons used motor oil
2. Easy to operate,low operation cost, only 1-2 workers can control the machine.
3. The machine can recycle gasoline motor oil, diesel motor oil, all kinds of engine oil, and other lubricant oil to clean oil.
4. Environmental friendly. This machine is full-enclosed, there is no any harmful smell come out form the machine, colloid, oxid, acid, pitch will be converted to oil sludge, can be use as bitumen and fuel.
5. 85% high recycling rate. This includes 6-8% diesel and gasoline mixture,80-85% base oil and 8-10% oil sludge.
6. Efficient vacuum systems
7. High quality refined oil, no any discoloration caused by oxidation, no any bad smelling.
Waste Lubricating Oil Purification Machine | |
Base oil Recovery Rate: | |
Component | Percentage(%) |
Gasoline&diesel oil | 7% |
Base oil | 80-85%(abase on your water content) |
Residue | 7-10% |
Waste Lubricating Oil Purification Machine | ||||
Recycled base oil parameter: | ||||
No | Item | Unit | Technical data | |
Light base oil | Medium/heavy base oil | |||
1 | Viscosity(40°C) | mm2/s | 16~32 | 28~72 |
2 | Viscosity index | ≥99 | >110 | |
3 | Appearance | Transparency | Transparency | |
4 | Color index | ASTMD 1500 Number | ≤1 | ≤2 |
5 | Pour point | °C | -15 | -10 |
6 | Water content | %(W/W) | ≤0.05 | ≤0.05 |
7 | Flash point(open) | °C | ≥180 | ≥210 |
8 | Ash content | %(W/W) | 0.005 | 0.005 |
9 | Carbon residue | %(W/W) | ≤0.13 | ≤0.13 |
10 | Corrosion(copper,100°C,3h) | Qualified | Qualified | |
11 | Acidity | mgKOH/g | ≤0.05 | ≤0.05 |
Waste Lubricating Oil Purification Machine
