1,Oil by vacuum distillation 2,High quality final base oil 3,Environmental friendly 4,Refine waste engine oil to yellow base
Black Waste Motor Oil Refining System
Because the waste oil contain too much
contamination, including non-hydrocarbon, alkene, polycyclic aromatic
hydrocarbon, metal hydronium, impurities, metal particles, asphaltene and colloid etc. and due to the traditional technology
only can refine the waste oil to base oil,
cant use directly, so our company is
researching the new technology about
distilling machine, which can distill all kinds of waste oil into clean oil, easy to operation, and the lower operation cost.
Working principle
Black Waste Motor Oil Refining System adopt physicochemical actions to polymerize,passivate, absorb and eliminate impurities and harmful contamination. We research a new chemical alkaline complex catalyst, which can restore and regeneration the Waste oil to clean oil, save the component of the oil.
Black Waste Motor Oil Refining System | |
Base oil Recovery Rate: | |
Component | Percentage(%) |
Gasoline&diesel oil | 7% |
Base oil | 80-85%(abase on your water content) |
Residue | 7-10% |
Advantages:
1. Low cost, cost is 30$ for refine one tons used motor oil
2. Easy to operate,low operation cost, only 1-2 workers can control the machine.
3. The machine can recycle gasoline motor oil, diesel motor oil, all kinds of engine oil, and other lubricant oil to clean oil.
4. Environmental friendlyThis machine is
fullenclosed, there is no any harmful smell come out form the machine, colloid, oxid, acid, pitch will be converted to oil sludge, can be use as bitumen and fuel.
5. 85% high recycling rate. This includes 6-8% diesel and gasoline mixture,80-85% base oil and 8-10% oil sludge.
6. Efficient vacuum systems
7. High quality refined oil, no any discoloration caused by oxidation, no any bad smelling.
Black Waste Motor Oil Refining System | ||||
Recycled base oil parameter: | ||||
No | Item | Unit | Technical data | |
Light base oil | Medium/heavy base oil | |||
1 | Viscosity(40°C) | mm2/s | 16~32 | 28~72 |
2 | Viscosity index | ≥99 | >110 | |
3 | Appearance | Transparency | Transparency | |
4 | Color index | ASTMD 1500 Number | ≤1 | ≤2 |
5 | Pour point | °C | -15 | -10 |
6 | Water content | %(W/W) | ≤0.05 | ≤0.05 |
7 | Flash point(open) | °C | ≥180 | ≥210 |
8 | Ash content | %(W/W) | 0.005 | 0.005 |
9 | Carbon residue | %(W/W) | ≤0.13 | ≤0.13 |
10 | Corrosion(copper,100°C,3h) | Qualified | Qualified | |
11 | Acidity | mgKOH/g | ≤0.05 | ≤0.05 |
Black Waste Motor Oil Refining System
