Detailed Product Description
AtoN AISMANDO-101
FEATURES
1. Multiple interfaces: Wireless / digital / analog
2. Optional SD Card slot for data storage
3. Wide range of power source
4. Remote configuration enabled
5. Meteorological & hydrological data enabled
6. Lower power consumption
Specifications
PHYSICAL DIMENSION
Height | 50 mm |
Width | 140 mm |
Depth | 200 mm |
weight | < 2 kg |
Case Material | Rugged water resistant aluminium alloy |
POWER SUPPLY
Input Voltage | 9V ~ 36V |
POWER CONSUMPTION
Transmission Scheduled every 3 min | < 0.7 A hr nominal |
TRANSMITTER PERFORMANCE
TX Frequency Range | 156.025MHZ ~ 162.025 MHZ |
Channel Space | 25 KHZ |
Modulation | GMSK/FM |
Data Rate | 9600 bps |
TX Power Control | 1 watt ~ 12.5 watts ( Programmable ) |
Carrier Power Error | 1.5dB ( normal ) |
Frequency Accuracy | ± 3 ppm |
Nominal Impedance | 50 ohm |
Channel protection | 1 sec max on air |
RECEIVER PERFORMANCE ( TYPE 3 ONLY )
Number of Receivers | 2 |
RX Frequency Range | 156.025 MHz ~ 162.025 MHz |
Data Rate | 9.6K dps |
Frequency Stability | < ± 3 ppm |
PER | 20% at -107 dBm |
Co-Channel Rejection | 10 dB at 10 KHZ offset |
Adj. Channel Rejection | 70 dB at 25 KHz |
Nominal Impedance | 50 ohm |
GPS RECEIVER
Receiving Channels | 65 Channels |
Cold Start | 45s |
Hot Start | 1s |
Acquisition Sensitivity | -155dBm |
Tracking Sensitivity | -155dBm |
Position Accuracy | 5m CEP |
DGPS | DGPS support , SBAS ( WAAS/EGNOS ) Capable |
ENVIROMENTAL
Operating Temperature | -15 ~ +55 |
Storage Temperature | -25 ~ +70 |
Relative Humidity | 0 ~ 95% |
INPUT/OUTPUT ( WIRELESS/DIGITAL I/O / ANALOG I/O )
Wireless | 1) Bluetooth ( Optional ) |
2) One RS232 port for Iridium Satellite | |
Communications ( Optional ) | |
3) S232 port for GSM/GPRS Modem ( Optional ) | |
Digital I/O | 1) One isolated IEC61162 interface with NMEA0183 |
2) One RS232 port with NMEA0183 VDM format | |
3) One RS232 port for configuration | |
4) One SD Card slot for data storage ( Optional ) | |
Analog I/O | |
Control Output | 1)Two isolated control outputs N C relay for alarm |
Indication ( default ) or other control usages | |
Sensor monitor | 2)Two isolated status input channels with 5mA constant |
Current sink for external device status input ( e.g. read | |
Light fault, light on/off, etc .) | |
Analog Signal Inputs | 3)Four ADC Channels for external sensors |
INDICATOR
1)One power and system status indicator ( Optional ) | |
2)Two TX/RX indicators ( Optional ) |
CONNECTOR
1)VHF connector ( M Jack ) | |
2)GPS connector ( TNC female ) | |
3)Power Switch | |
4)Bluetooth antenna connector ( SMA) |
TECHNICAL STANDARDS
IEC60945
IEC61162-1/2
IEC62320-2
ITU-RM.1371
IEC61162-100
IEC61993-2
IALA Recommendation A-126
