Welcome to ECBAY
cheap injection handle mould with 4 cavity
cheap injection handle mould with 4 cavity

1.material is Aluminum or steel 2.one million time usage

Brief Introduction:

 

² Keep 500°C about 36 hours in vacuum station to eliminate the stress, make sure the molding board steady after long time use.

² Slipper block use HUSKY type, with material of steel P20, which is highly anticorrosion, all the move parts used advanced ion nitrating treatment, the surface hardness is HRC48-52.

 

              

 

Spare Parts (screw, coin and cavity): 

       

 All uses material steel 2316, with high anticorrosion and hardness is HRC46-48.

 

 

 

 

 

      

           

 

 

 

 

    

 

 

 

 

 

cheap injection handle mould with 4 cavity

Ads by Google


About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.