Wire Drawing die 1: Material: PCD or ND 2: Used for copper and iron wire 3: Stainless steel casing 4: Bright surface
High Wear- resistance Diamond Drawing Die
1: Material: PCD or ND 2: Used for copper and iron wire3: Stainless steel casing4: Bright surface
...........................................................................................
Feature
PCD wire drawing die
PCD wire drawing die has good wear resistance, uniform bore, strong impact and high wire drawing efficiency, and the price is much cheaper than natural diamond wire drawing die. PCD wire drawing die is widely used in wire drawing industry. Used for aluminum wire, copper wire, stainless steel wire, alloy wire etc..
size range | tolerance | casing ref. Size | ||
inch | mm | mm | mm | |
≤0.0008 | ≤0.020 | 0.0006 | Φ25×6 | |
0.0008 – 0.0019 | 0.020 – 0.050 | 0.0006 | Φ25×8 | |
0.0020 – 0.0039 | 0.051 – 0.100 | 0.001 | Φ25×8 | |
0.0040 – 0.0079 | 0.101 – 0.200 | 0.001 | Φ25×8 | |
0.0080 – 0.0199 | 0.201 – 0.500 | 0.0015 | Φ25×8 | |
0.0200 – 0.0399 | 0.501 – 1.000 | 0.002 | Φ25×10 | |
0.0400 – 0.0590 | 1.001 – 1.500 | 0.0025 | Φ25×12 | |
0.0591 – 0.0866 | 1.501 – 2.200 | 0.003 | Φ25×14 | |
0.0867 – 0.1299 | 2.201 – 3.300 | 0.004 | Φ28×16 Φ30×16 | |
0.1300 – 0.1810 | 3.302 – 4.600 | 0.005 | Φ28×18 Φ30×18 | |
0.1811 – 0.2164 | 4.601 – 5.500 | 0.006 | Φ43×26 | |
0.2165 – 0.3150 | 5.501 – 8.000 | 0.008 | Φ43×30 | |
| soft wire | hard wire |
entrance angle | 70+/-20 | 60+/-20 |
reduction angle | 16+/-2 | 14+/-2 |
bearing length | 25-50% | 40-80% |
exit angle | 15+/-5 | 15+/-5 |
back relief angle | 50+/-20 | 50+/-20 |
soft wire: copper wire, aluminum wire, brass wire, gold wire etc.
hard wire: stainless steel wire, copper plated steel wire, tungsten wire etc.
............................................................................................
Specification
Diamond Series
Carbide Series
International Standard
High Wear- resistance Good price-quality Diamond Drawing Die
