Welcome to ECBAY
PCD cutter for mining bits
PCD cutter for mining bits

1.PDC cutter,PCD cutter,PDC insert 2.Highest Abrasion Resistance 3.High Diamond Volume 4.Good Toughness

1. The diamond powder is selected in a higher degree. 2. Use a new type of tungsten carbide that different from S-RTC cutters, which improved the strength character of bonding. 3. The claws of the interface are changed to be net-grooves-shaped which formed by 20 straight vertical grooves, and the depth of the grooves are shallower. 4. Improved the interior structure of the sintering cell that makes the pressure and temperature to be more uniform. It is very important for the PDC sintering. 5. Use new super heat-resistant metal, to avoid being contaminative during sintering. 6. Amended the sintering processing, and improved the bonding strength of the diamond-diamond key among the diamond layer. 7. Increase the content of diamond, and increase the thickness of diamond layer up to 2.0mm. The result of plenty of tests and the performance in customers' practical drilling in the oil fields shown that the performance of "S-RNC" in heat resistance and impact resistance are improved evidently, and quite similar to the cutters made by the best world-class manufactures. In past year, S-RNC cutter is very widely used in China and other countries. It accepted by most customers and successfully substituted the old S-RTC cutter in the market.

d.Standard Sizes:

SPEC.  

1919

1916

1913

1619

1616

1613

1313

1308

D(mm)

19.05

19.05

19.05

16

16

16

13.44

13.44

H(mm)

19

16.31

13.2

19

16.31

13.2

13.2

8

PCD cutter for mining bits

Related Products
Ads by Google


About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.