HG8185 185HP MOTOR GRADER WITH CAT/CUMMINSENGINE
WITH CAT/CUMMINS ENGINE,ZF TRANSMISSION,HOT FOR RUSSIA,AFRICA,IRAN,BRAZIL MARKETS.CE APPROVED,OEM for SDLG,VOLVO..
| Engine rated power/rev | 135kW/2200rpm |
| Dimension | 8900×2625×3470mm |
| Weight | 15000kg |
| Distribution weight of front wheel | 4500kg |
| Distribution weight of rear wheel | 10500kg |
| Min. clearance | 430mm |
| Front and rear axle clearance | 6219 mm |
| Front and rear axle clearance | 1639mm |
| Max. steering angle of front wheel | ±50° |
| Max. inclination angle of front wheel | ±17° |
| Max. swing angle | ±15° |
| Frame steering angle | ±27° |
| Min. turning radius | 7.3m |
| Traction | ≥77kN |
| Gradeability | 20% |
| Forward speed | 5,8,11,19,23,38 km/h |
| Reverse speed | 5,11,23 km/h |
| Blade | |
| Max. lifting height | 460mm |
| Max. Digging Depth | 500mm |
| Max.inclination angle | 90° |
| Cutting angle | 28°—70° |
| Rotating angle | 360° |
| Blade length × arc height | 3965×610mm |
| Driving wheel no. | |
Main technical parameter of optional working devices
| |
| Front bulldozing plate | |
| Bulldozing width | 2744mm |
| Digging depth | 110mm |
| Rear scarifier | |
| Gear no. | 5 |
| Digging depth | 350mm |
| Scarifying width | 2095mm |
| Gear no. | |
| Digging depth | 2 |
| Scarifying width | |
| Medium harrow | |
| Gear no. | 11 |
| Digging depth | 280 mm |
| Scarifying width | 1325 mm |
Main technical parameter of assembly
| |
| Engine | |
| Factory model | D6114ZG |
| Type | Turbocharger 6-cylinder 4-stroke direct injection water cooled diesel engine |
| Engine rated power/ rev | 125kW/2200rpm |
| Bore X stroke | 114x135mm/4.5x5.3″ |
| Displacement | 8.3L |
| Compressing ratio | 17.3 : 1 |
| Battery | 2x12V/135A·h |
| Motor | 24V 5.8kW |
| Generator | 28V 70A |
| Transmission | |
| Factory model | HC-YD13 |
| Type | 6-Forward and 3-Reverse electro-hydraulic control power transmission |
| Control type | Single lever electro-hydraulic cotrol |
| Control pressure | 1.3-1.7MPa |
| Forward speed | 5,8,11,19,23,38 km/h |
| Reverse speed | 5,11,23 km/h |
| Drive axle | |
| Factory model | Meritor XPRC1333H018 |
| Main reduction ratio | 5.991 |
| Axle speed ratio | 17.779 |
| Brake | |
| Type | Dry |
| Brake system | 4-rear-wheel full hydraulic brake system |
| Brake type | Shoe |
| Brake cylinder pressure | 10Mpa |
| Brake system pressure | 16Mpa |
| Brake | Manual shoe |
| Tyre | |
| Type | Inner tyre |
| Model | 17.5-25 RP12 |
| Working hydraulic system | |
| Working pump | Gear pump |
| Flow | 2x52L/min |
| System pressure | 18Mpa |
| Control type | Manual |
| Hydraulic cylinder | Bore x stroke |
| Blade raising | 90 x 1110mm |
| Blade swing | 90 x 540mm |
| Blade outlet | 90 x 1400mm |
| Steering hydraulic system | |
| Type | Load sensing fully hydraulic steering system |
| Steering pump | Gear pump |
| Flow | 18 x 2.2L/min |
| System pressure | 16Mpa |
| Hydraulic cylinder | |
| Bore×stroke | 70 x 350mm |
| Max. steering angle of front wheel | ±50° |
| Service refill capacities | |
| Fuel tank | 280L |
| Engine | 24L |
| Coolant | 50L |
| Transmission | 26L |
| Balance box | 46L |
| Drive axle | 28L |
| Hydraulic oil | 110L |
| Worm wheel box | 2.5L |
HG8185 185HP MOTOR GRADER WITH CAT/CUMMINSENGINE
