Chipset: Intellon INT6400 Transmitting data up to 200Mbps across the household power line. No any need to install new wire.

Product introduction:

This 200M Wallmount can provide the transmission of broadband data service via power line,which are suitable for use in a wide range of both residential (in-home) and commercial (offices,apartments, hotels, warehouses) network applications in which existing power lines can be utilized.

 

There is never any need to install new wires. These adapters enable the effortless creation of a high-speed network that supports video, voice and data.

 Application of HW-PLC6400 : High Definition (HD) and Standard Definition (SD) video distributionHigher data rate broadband sharing for power line LAN                 Shared broadband internet accessTV over IP (IPTV) and Voice over Internet Protocol (VoIP)Backbone for wireless and wireless extenderVideo surveillanceOnline gaming

System SPEC
Chipset	Intellon INT6400
SDRAM	128bits
Serial Flash	16Mbits
Firmware	Support North America/Europe/APAC/Japan
Feature and Technology SPEC
Protocol	HomePlug AV 1.0EEE802.3  10/100 Ethernet(100Mbps)EEE802.3u  Fast EthernetCo-exists with existion HomePlug1.0
System Support	Windows 98SE, 2000, ME, XP 32/64 bit ,Vista 32/64bit,Windows732/64bit
PLC Rate	200Mb
Data Rate- TCP/UDP	65Mbps TCP90Mbps UDP
Modulation Band	2-30MHz
Modulation Schemes	Supports256/64/16/8-QAM, QPSK,BPSK and ROBO
Encryption	128 AES
QoS	Support contention-free access, four-level priority basedcontention access, and multi segment burstingSupport VLAN PrioritySupport ToS and CoS Packet Classifier
Max PLC Nodes	8
IGMP Streams	Up to 32
TR-069 Support	Yes(Optional)
Work Mode	TDMA and priority based CSMA/CA
Multicast Support	Supports IGMP managed multicast sessions
IPv6	Support
SNMPv2 or v3	Support
Typical Coverage	Up to 5000 square foot homeThe actual Coverage will vary with the power grid and the numberOf PLC terminal device.
LED’s	PowerEthernet: Ethernet Link and ActivityData: PLC Link and Activity
Push Button	RESET:Restore the default factory parameterNMKSET:Set up network password automatically
Power Socket	Support British, Euro, Japan, US and China power connector
Ethernet Interface	1 x RJ45 for 10/100 Ethernet (Auto MDI/MDI-X)
Consumption	<4.0W
Environment Requirement
Operating Temperature	0ºC to 45ºC
Storage Temperature	-20 ºC to 70 ºC
Operating Humidity	10% to 90% Non-condensing
Storage Humidity	5% to 90% Non-Condensing
Input Rating	100-240 VAC, 50/60Hz
EMC and Safety
Regulatory Compliance	FCC Part 15 Class BCE
Safety Regulations	UL
Green Standard	RoHS
Physical Dimension
Physical Characteristics	L×W×H: 90mm*55mm*33mm
Weight	108g

 

200Mbps Wallmount homeplug powerline adapter