portable mobile power bank for iphone4, ipad, ipod, e-book, all mobile 1,easy carry 2,high efficiency CE,ROHS OEM
portable power pack for cell phones
Power Bank CT-N2 User Manual
1. SpecificationModel- CT-N2Battery type - Li-polymerBattery Capacity-10000mAhUSB charge input:-5V-1500mAUSB charge output(Dual output):Output 1-5V/800mA,Output 2 5V/1500mACharge time- 7-8 hoursWorking time- 8hours around(Depend on the devices charged and output selected)Battery life-500 charge and discharge circlesStorage temperature--20°C-60°C
Measure-110 x 75 x 16MMWorking temperature- -10°C-40°CShort circuit Protection-Device and all sockets are intellective automatic short circuit protection designSafety and Reliability- Safe and reliable battery built-in, long battery life.Appearance-Private fashion and portable design.Compatibility-Mobile Phone, PSP, I PHONE,I PAD,I POD,MP3,MP4,PMP, GPS, Bluetooth,Digital Camera,etc.2,Notice1) Do not adjust the output voltage higher than the voltage of the device to be charged, or may cause damage tothe device, please be sure before using.2) Please better to use AC adaptor to charge Power Bank.3) Full charge power bank via AC Adaptor need around 5 hours.4) Do not short circuit power bank, or disassemble, or put into the fire.5) Attention to the moisture-proof and waterproof.6) If not charge to other devices, please check the cable whether is good, solid or charging socket fittings issuitable or not.7) Power bank energy conversion efficiency is not equivalent to the rechargeable capacity.8) Power bank majority suitable for mobile phone, there will be individual models do not support charging, inwhich case this product is not in warranty coverage.9) Do not disassemble the power bank, if you have any questions please contact the local dealer.
3,ApplicationCharge other devices1) Firstly select the correct connector according to the device need to be charged.2) Connect the connector to other device, connector’s other end connect to N2 power bank USB Cable, thenconnect USB Cable to N2 power bank.(Select the voltage according to the device need to be charged, and select thecurrent required.)3) Long press power button 3-5 seconds, until the indication light up, now it’s charging.Charge N2 power bank1) Select the connector to connect N2 power bank and USB Cable, then connect USB Cable to AC adaptor.2) Select the connector to connect N2 power bank and USB Cable, then connect USB Cable to Laptop orComputer(Due to small current from laptop or computer, will cause charge time very long)Charge N2 light indication
Charging N2 power bank, while battery capacity below 30%, first light flashing, the other does not light up.After charge to 30% - 50% battery capacity, the first lights no longer flash, the second light start flashing.After charge to 50% - 75% battery capacity, the second lights also no longer flash, the third light start flashing.After charge to 75% - 90% battery capacity, the third lights also no longer flash, the forth light start flashing.Once all the four light no longer flash and all light up, now it is fully charged.N2 battery capacity light indication
While N2 charge to other device, battery capacity is decreasing, it is indicated by the 4 LED lights. After batterycapacity lower than 10%, the first LED light will be flashing, now need to charge the N2 power bank.
4,AccessoriesAccessoriesItem QTY PCEConnectors 6 pcsUSB cable 1 pceWarranty card 1 pceUser manual 1 pceModel- CT-N2Battery type - Li-polymerBattery Capacity- 10000mAhUSB charge input -5V-1500mAUSB charge output(Dual output) Output 1-5V/800mA,Output 2-5V/1500mACharge time- 7-8 hoursWorking time- 8hours around(Depend on the devices charged and output selected)Battery life- 500 charge and discharge circlesMeasure-110 x 75 x 16MMCompatibility-Mobile Phone, PSP, IPHONE,I PAD,IPOD,MP3,MP4,PMP, GPS, Bluetooth,Digital Camera,etc.
portable power bank for cell phones 10000mAh
