Nauta Mixer CE approved; Food Grade; Shinny Polished; Powder Mixing; Pharmaceutics; Agriculture; Dyestuff; Chemicals;
Design and Manufacturing According to FDA&cGMP Standard
General Introduction:
Conical Double Screws Mixer is asymmetrically cantilevered with two combined helixes, one is longer than the other, they make rotation circle their axes and at the same time make revolution circle the cone’s center axis, by which the material will be elevated repeatedly and form shearing, convection and diffusing in the cone cylinder to realize perfect mixing effect. The standard products including double motors drive( A type ) and single motor drive( B type ).
Product Description:
A,Mixing EffectThe standard double screws cone-shape mixer is equipped with two agitating augers, yet single(a long auger), double(two dissymmetrical augers with different length) or triple(three symmetrical screws with two long and one short) augers is adopted in fact according to the size of the device; theoretically, more angle augers there are, better the mixing effect is.
B,Cooling and heatingCool or heat the materials through feeding the cold or hot medium into the jacket which is added to the outside of the cylinder of the mixer. Pump industrial water for cooling and steam or heat oil heated by electricity for heating.
C,Liquid-adding mixingThe mix of injecting liquid can be achieved by connecting the atomized spray nozzle with spray pipe which is inserted in the intermediate axle location of the mixer. With choosing the specific materials, the mix of powder and liquid can be conducted by injecting acid or alkali liquid.
D,Compression ResistanceThe cover of the cylinder can be made as the shape of a dome, deceasing residue to clean easily while improving compressive strength of the mixer cylinder, which should be frequently used when pressure resistance cylinder is needed.
E,Negative Pressure FeedingThe cylinder of the mixer can be made as negative pressure chamber in specific process, which breathes the dry material with good fluidity in mixing chamber for mixing using soft pipe, without residue and pollution in the feeding segment.
F,Discharging ModeThe standard device typically uses plum flower-shaped “dislocation valve” that joints closely with the bottom of long screw to decrease mix dead angle effectively with two driving methods, manual and pneumatic. It can also use butterfly valve, ball valve, star-shape material discharging device, side discharge and so on according to the user’s requirements.
Technical Parameters:
| Model\Project | Total Volume(M³) | Loads coefficient | Electrical machiney power(Kw) | Size(mm)× Max-diameter ×High | Equipment weight(Kg) |
| DSH-0.06 | 0.06 | 0.4-0.6 | 1.5 | φ630×1451 | 150 |
| DSH-0.1 | 0.1 | 0.4-0.6 | 1.5 | φ715×1569 | 250 |
| DSH-0.3 | 0.3 | 0.4-0.6 | 2.2 | φ920×1960 | 550 |
| DSH-0.5 | 0.5 | 0.4-0.6 | 3 | φ1140×2320 | 600 |
| DSH-1 | 1 | 0.4-0.6 | 4 | φ1480×2895 | 1200 |
| DSH-1.5 | 1.5 | 0.4-0.6 | 5.5 | φ1633×3210 | 1350 |
| DSH-2 | 2 | 0.4-0.6 | 5.5 | φ1816×3495 | 1500 |
| DSH-3 | 3 | 0.4-0.6 | 7.5 | φ2040×3760 | 2300 |
| DSH-4 | 4 | 0.4-0.6 | 11 | φ2250×4425 | 2520 |
| DSH-6 | 6 | 0.4-0.6 | 15 | φ2548×4940 | 3000 |
| DSH-8 | 8 | 0.4-0.6 | 18.5 | φ2780×5360 | 4500 |
| DSH-10 | 10 | 0.4-0.6 | 22 | φ3018×5815 | 5500 |
| DSH-12 | 12 | 0.4-0.6 | 22 | φ3204×6100 | 5900 |
| DSH-15 | 15 | 0.4-0.6 | 30 | φ3442×6540 | 6600 |
| DSH-20 | 20 | 0.4-0.6 | 37 | φ3805×7420 | 9800 |
| DSH-25 | 25 | 0.4-0.6 | 37 | φ4086×7800 | 10200 |
| DSH-30 | 30 | 0.4-0.6 | 45 | φ4330×8200 | 11500 |
Nauta Mixer(FDA&cGMP Approved)
