Welcome to ECBAY
Wet Magnetic Separator
Wet Magnetic Separator

1. Wet magnetic separator 2. Magnetic intensity: adjustable 3. Capacity: Max. 300 tons per hour 4. High efficiency

Wet magnetic separator for particle size below 3mm magnetite, pyrrhotite, roasted ore, ilmenite and other materials, wet magnetic separation, but also for coal, non-metallic minerals, building materials and other materials, iron work, widespread use of iron ore dressing plant a magnetic separator.

Product Advantage

1. Widely used: to complete more than 30 mineral processing of iron needs;

2. Operation is simple: one person can complete the entire magnetic separation process;

3. Save costs: low energy consumption and saving over the past more than 45% magnetic separation equipment

Introduction

Wet magnetic separator is based on customers for their valuable advice and I sum up the experience of developed production of a new generation of magnetic separation equipment. This machine is designed for wet magnetic separation of fine weakly magnetic mineral separation problems and design, use of weak magnetic flux tube in addition to iron, magnetic separation of the magnetic roller means to achieve mine election. Size 3mm below for magnetite, pyrrhotite, roasted ore, ilmenite and other materials wet magnetic separation, but also for coal, non-metallic minerals, building materials and other materials, iron work, iron ore A commonly used concentrator separator.

Wet Magnetic Separator worksAfter the ore slurry tank into the tank after the water pipe water to the mine under the influence of mineral particles into the tank was loose state of a mine. In the magnetic field, the magnetic mineral particles together to form the magnetic occurred "magnetic group" or "flux", "magnetic group" or "flux" in the pulp by the magnetic force, to pole movement, and be attracted to the cylinder on. Concentrate magnetic system with the cylinder to the weakest at the edge of magnetic, mineral water spray in the unloading effect of flushing water was discharged into the concentrate tank to complete the magnetic separation process.

Wet magnetic separation machine features1. Widely used: to complete more than 30 mineral processing of iron needs;2. Operation is simple: one person can complete the entire magnetic separation process;3. Save costs: low energy consumption and saving over the past more than 45% magnetic separation equipment;4. Poor in iron, broken or crushed by the thick rough after the election, remove rock and other waste rock, improve quality, reduce the load on the next process.

Wet magnetic separator structure:Wet Drum Separator mainly by the permanent magnet cylinder, roller, brush roller, magnetic system, tank, transmission parts 6 parts. Cylinder by a 2-3mm stainless steel plate welded into the tube, end caps for the aluminum casting or workpiece, connected with stainless steel screws and barrel

Model

Diameter(mm)

Length(mm)

Tube table field strength(kA/m)

capacity(t/h)

Feed size(mm)

Power(kw)

Weight(t)

CT406

400

600

80~450

2~4

2~0

0.55

0.4

CT603

600

300

80~400

2~4

2~0

0.55

0.4

CT606

600

600

80~400

5~10

2~0

1.1

0.95

CT609

600

900

80~400

8~15

2~0

1.5

1.3

CT612

600

1200

80~400

10~20

2~0

1.5

1.5

CT618

600

1800

80~400

15~30

2~0

1.5

1.8

CT712

750

1200

120~400

12~25

2~0

1.5

2.0

CT718

750

1800

120~400

30~45

2~0

3.0

2.2

CT724

750

2400

120~400

30~65

2~0

3.0

2.5

CT918

900

1800

130~400

35~60

3~0

4.0

2.8

CT924

900

2400

130~400

70-110

3~0

4.0

3.5

CT1018

1050

1s800

130~400

40-75

3~0

4.5

3.5

CT1021

1050

2100

130~400

50-80

3~0

5.5

3.5

Wet Magnetic Separator

Related Products
Ads by Google


About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.